💧 Corsair Hydro X XF Compression Fittings - 10/13mm (3/8"/1/2") ID/OD - 4 Pack, Black (Model: CX-9051002-WW) Review

It will be an absolute nightmare to fit the PrimoChill hoses (you will probably need a rubber wrench to tighten the compression fittings more than hand) but the fittings are good quality and nothing special. tell. They don't spring and hold the pipe well.

I would give this 5 stars if it was clearer from the name that these fittings are for softline hoses and not hardline hoses, but I don't want my ignorance to be blamed on the product in the ways stands . After all this confusion and waiting another week to put my computer back together, I was surprised at how easy they were to use. I had a little trouble figuring out how to connect it to the hose, again my ignorance at work, the trick is to screw the fitting into a component (like a pump or…

I bought these and EKWB 10/13mm fittings. My fingers were saved as soon as I received them. I messed up and got these second ones. EKWB 10/13mm compression fittings are much more difficult to install on pipe and prevent the pipe from slipping during installation causing the pipe to kink or worse and require pre-torque to "unwrap". "Screw yourself" while it unwinds. Save time and effort and GET IT! Two savers: time and money. What more can you ask for?

This is a must have. I can't think of anything easier with the comfort they offer. The only thing I personally don't like is that when trying to unscrew the clamp fitting the whole assembly tends to come loose. Also class A

This product was delivered very quickly and fits 14mm tubes not 12mm tubes. Very easy to install if you have a suitable case or tank before putting it in place. Small cases are a little tricky to install, but generally when it's aligned, it twirls like butter. The material is a nice and heavy metal. I would choose metal over plastic right angles for durability. I don't know what heat means, but metal keeps the coolant cold in the facility without fear of leaks. When you install the tube…

I have used almost every G 1/4 water cooled fitting on the market for the last 10 years. I bought 12 faucets here at Revain. When moving the hardware for competitive overclocking, I remove the 16mm PET hardline and install soft tubing on the CPU water block and GPU water blocks. I installed these fittings on my device. So when it comes time to move things, I drain my system, then I can't unbolt the top of the fitting to remove the "Corsair Soft Tube". It's locked tight. I tightened it by hand…