Header banner
Revain logoHome Page
cpu cooler deepcool ck-11508, black logo

CPU cooler Deepcool CK-11508, black Review

8

·

Average

Revainrating 3.5 out of 5  
Rating 
3.4
Computers, 💻 Computer Components, 🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(14)
img 1 attached to CPU cooler Deepcool CK-11508, black
img 2 attached to CPU cooler Deepcool CK-11508, black
img 3 attached to CPU cooler Deepcool CK-11508, black
img 4 attached to CPU cooler Deepcool CK-11508, black

Description of CPU cooler Deepcool CK-11508, black

Producer:Deepcool ;Dissipation power:65 W;Weight:245g;Number of heat pipes:no ;Maximum noise level:25dB;Radiator material:aluminum ;Number of complete fans:1 ;Purpose:for the processor ;Fan diameter:92mm; Connector:3 pin ;Maximum rotation speed:2200rpm;Fan light:No ;Regulator:No ;Maximum airflow:42.35 CFM;Bearing type:Fluid dynamic bearing (FDB bearing) ;Fan thickness:25mm;Socket LGA1356/1366: No ;

Reviews

Global ratings 8
  • 5
    4
  • 4
    0
  • 3
    0
  • 2
    3
  • 1
    1

Type of review

Revainrating 5 out of 5

A great option for this money, I definitely recommend it!

in principle, the fan is normal even with a 5v power supply (the temperature of the processor did not rise above 43-45 ° C), it's up to you to take it or not to take it. Different pros: Neat, lightweight fits multiple sockets. thermal paste applied. Cons: not much noisy (you can fix it by lowering the supply voltage of this fan in the BIOS to 5v (I don’t recommend setting it below 5v because it doesn’t have enough power to start up and it can burn out or the processor can burn out from…

Revainrating 1 out of 5

I am very upset, the product is no good.

I have 30 such coolers at my disposal, 5 of them have already failed (within 4-5 months), they just stopped rotating, the problem is in the fan axis, it sticks, why? and the devil knows, completely dismantled, by breaking out, the axis is tight. I pulled it out with pliers and stuck it in again, without purging and lubrication, it’s going great, though you can’t put it back. The systems were purged regularly, approximately once every 2 months. There are suspicions that dust got into the axis…

Pros
  • Advantages? The maximum price, and that is, better analogues, at the same price.
Cons
  • 1. Small contact surface. 2. Infernal noise (although knowing the price is understandable, but still you should remember about it) 3. Poor reliability 4. Lack of ability to fix lubricate. If everything is clear with the first two points, in connection with the cost of the cooler, then with the rest, everything is not so clear. The fan itself is not removed as in some models, as a result of which it cannot be lubricated or repaired.

Revainrating 2 out of 5

Not at all what I expected.

For the Pentium g4560, it's just right, but the noise, the mother of his noise, I think he can't cope with higher processors.

Revainrating 5 out of 5

Excellent quality, absolutely not expected for such a price.

I took it for 97r. This is actually a gift. The cooler holds up to 65W, maybe even a little more at full speed. The fan itself is quiet up to 1600 rpm. Very quiet at 1200-1300 rpm. Provided installed in the case. True, I have a little chirping, I can not hear it in the case. Holds g1820 under load up to 70 C pace (linx), 1200 rpm. A good cooler in terms of performance/price ratio.

Pros
  • - holds cpu c tdp up to 65W - quiet - cheap
Cons
  • Not for this price. We can talk about the quality of the fasteners, the fan over time.

Revainrating 5 out of 5

A really necessary purchase, Im glad I found this product.

It is 100% noisy, of course, but even if the mother is just lying on the table, you can get used to it and not pay attention. Start voltage - approximately 3.1V - this is approximately 830RPM Through PWM (duty cycle change) is not regulated, through DC (voltage change) it is regulated normally. Very quiet. Thermal paste applied immediately. A cross-head screwdriver is required for installation. For processors with a power of 50W - ideal

Pros
  • A logical installation, the bottom plastic plate on the back of the board can of course be turned in any direction, but it has only one direction xD

Revainrating 5 out of 5

I would definitely recommend the purchase, I don't think there is anything wrong with it.

Good cooler. Better than the factory cooler from intel. I paired it with 10100f (65W), in a stress test 72 degrees. It's not critical, but I would like it to be smaller. So I won’t advise pairing 10100f because I want to see temperatures in the region of 60-65. It is easy to attach, but a rainbow of colored wires kills, this also applies to the PSU. This is my personal fetish. The thermal paste needs to be replaced immediately.

Pros
  • Price
Cons
  • I wish the wires were black. Thermal paste.