💎 High Performance Super Thin Diamond Tile Blade (7") for Cutting Porcelain, Granite, and Marbles Review

Includes 5/8 shaft adapter washer. On what I got, at least the washer is too big to fit the hole. I tried pushing it in by sliding it loosely onto the saw and then tightening the screw to set it in place, but that ended up with it just getting stuck in the saw. Useless to me.

This cutting disc was amazing. Worked great on my wet saw. Nice even cuts in the marble tiles I cut and the cement based floor tiles. I remodeled our bathroom and tiled the floor and shower stall floor to ceiling with 3 x 6 marble tiles (cement tiles on floor) so cuts had to be made by hand. A floating bench cover was also installed in both tiles. I also only used one of the blades in the pack and it still cuts great. Will definitely buy these knives again.

Looks like a top quality blade but I used 2 blades and both were causing a lot of vibration on a 6 month old DeWalt tile cutter. No doubt it will work well as this style of blade is excellent. I was really looking forward to using this saw blade, but working with it on any saw destroys the shaft bearings in a short time. I hope they can fix this as I would love to use this style of blade as it can run dry and chip minimally if needed.

I bought these to cut 1-1/4" thick granite. The disc started sparking right away and I couldn't keep the saw on the guide. Noticed before ( can be seen in the product photo) - These blades have a hub in the middle that is thicker than the edge - to use the blade on my granite I would only have to cut in half and then turn the slab too hard I will use it for holding something thinner that I'll have to carve later, but I'll definitely be using something else to finish the granite.

I use this blade on a 10 inch water cooled tile cutter. The blade stays sharp. So far so good. I have more Spanish kitchen tile shops. I will keep you informed. Good price. Of course there are other considerations, e.g. Flow rate, purity of the cooling water. Here's a suggestion: put your pump in a 5 gallon bucket with a longer hose to the nozzle. This way you get constant clean water for the blade and the pump. The blade and the pump last longer.

Bought a 2 pack for scraping and enlarging the sink cutout in a granite worktop - the first blade made all the cuts quick and easy leaving a really clean track cut - project closed. A few months later, the porch railings (wood and glass surrounded by a plaster wall) are rotting and need replacing - I don't know what's recommended for cutting through a 30 year old lathe, plaster, flashing and tie downs - I try Throwing a blade from a countertop - I have almost 200 feet per blade - cuts through…

For some reason the 8 inch blade I ordered wasn't as good as hundreds of reviewers had described. Let's start with the thickness. It is NOT super thin. He's really fat. The blade has spike bushings that won't fit unless much force is applied and it already looked rotten to me compared to other blades I've used. After assembling my sliding saw and turning it on, I noticed my saw vibrating like never before and I already knew the saw blade would be going back to the seller. Decided to check out…