🔒 DSC BV500GB PIR Motion Detector & Glassbreak Sensor: Superior Security Solutions Review

I installed this in our basement next to the exit window. This is ideal as it causes both window breakage and movement. Makes wiring easier.

Great product and range. I tried one of these a few months ago and now I'm replacing all my motion and glass break sensors with this sensor.[.]

I used this to replace the glass break sensor but after installing it I decided to just use the motion sensor instead of the glass break sensor and it works great!

you need 6 wires (red and black = power then you need hi and low for movement and hi and low for glass break = 6 wires) total if you Need glass break protection and movement from the same device. I have false errors when I connected 2 circuits together, even with EOL.

I used this to replace the glass break sensor but after installation I decided to just use the motion sensor instead of the glass break sensor and it works great!

you need 6 wires (red and black = power then you need high and low for driving and high and low for glass breaking = 6 wires) total if you Need glass break protection and movement from the same device. Got false errors when connecting 2 circuits together, even with EOL.

First of all, please note that I am an electronics technician by trade and am now retiring after 42 years of service; so i regularly read wiring diagrams, wiring diagrams, designed circuits and installed devices. Here are the problems I encountered while working with the DSC Bravo 5GB (BV500GB): (See the attached photos) (1) The board and the instructions do not match, in fact the 12V supply connections and the Relay contact connections actually swapped the instructions! I was able to get the…