🧹 Dyson Internal Hose 904219-02 for DC07 and DC14 Vacuum Cleaners Review

Happy to replace this on our 14 year old DC07 pet vacuum. Heating with a hair dryer will help with installation; makes the plastic more flexible. Make sure you have good lighting and those with small hands will benefit from this setup. Replaced it along with the hepa filter and brush. The suction power has definitely improved over the vacuum cleaner and it picked up more dirt and dust than before. The machine works the same as originally.

While looking for a problem with my vacuum cleaner I noticed that this inner hose had snapped. After checking online (both Revain and YouTube) I saw that it was easy to replace and that this part is not expensive. The product arrived and after watching a YouTube video I replaced the hose. I noticed that the vacuum seemed to work a little better. Whether that's true or not, replacing a broken hose with this one was inexpensive and effortless. My 13 year old vacuum cleaner works perfectly.

Greatly affects vacuum performance. The old one lost tension and didn't hold the brush head flat on the carpet. For less than $10, my $200+ vacuum works like new. was too small to fit through the port on my DC14. It took less than 1 minute to switch sides. and less than 2 minutes to install. If your Dyson is more than 3-4 years old, simply replace this tube. I am offering a motor filter kit, 2 canister filters and this hose as an annual Dyson upgrade kit.

If you're fitting it yourself - you really need to lift it up to the bottom yellow suction section of the brush - it's not obvious how far you'll need to rotate the section, but once you do, it works great and the sweeper section that is pressed to the ground stays pressed to the ground when you sweep. Otherwise it will come off the ground when you pull the sweeper back while sweeping. If it is not far enough away, hit the bottom of the hose with the bare floor/carpet select knob pivot rod on…

After about 12 years the front of my dc07 wouldn't make contact with the surface I was trying to vacuum. I found that the front was raised and not touching the ground at all. As a temporary solution I attached a 5lb weight to the front and was able to get a proper seal on the floor to create suction. At the same time, I only used my wireless Dyson, but I never managed to vacuum the whole house at once. Upon further investigating the cause, I found that this hose had become inflexible, not…

My Dyson Animal DC-07 is an original model from 2001. I remember buying it with a 20% BBByond coupon because they didn't have the option to redeem it from the coupon remove before the Dyson was put up for sale (win #1). My purple Dyson has had several parts replaced over the years: power cord (puppy teeth), hepa filter (yes), blue filter (spirit 2) and a long hose in the back due to accumulated dirt causing the vacuum cleaner smell. And now, after more than 17 years of use, the inner tube is…

Dyson quality product. The new hose is stiff and strong. Easy installation when you do this: 1) Disconnect the hose from the base of the motor using a screwdriver as a tool. 2) remove the brushroll using a Dyson belt replacement tool (easy), 3) remove the brush cover assembly from the motor base by gently prying it out of the hinge bushings at each end, 4) pry the old hose off the brushroll base with a screwdriver , 6 ) gently heat the spiral end of the new hose with a hair dryer until the…