🔥 Efficient ERP DG94-00520A Range Igniter for Optimal Performance Review

Samsung FX510BGS/XAA Gas Oven was purchased from Lowes 6 years ago. The broiler hasn't been working lately. The area igniter glowed orange but did not ignite the burner tube. I watched a video on YouTube and wanted to try replacing the igniter myself. It may not be OEM, it has an "EXACT" plug adapter and will fit. And much cheaper.! The exchange took about 30 minutes. Not sure about the model number? On mine, I pulled out the bottom drawer and the nameplate was on the left. Take your time, be…

Our 2017 Samsung oven (model NX58H5600SS) did not heat up. Instead of calling an expensive repairman, I did a little research, watched a few YouTube videos, and found that our detonator wouldn't fire. This seems to be a common problem with Samsung ovens. I didn't know if this would solve the problem, but it seemed worth spending only $24 on a possible fix. Ordered and installed in about 15 minutes. Press the "Bake" button and everything caught fire! Save some money and try it first! It was…

I have a Samsung nx58h5600ss that I bought from Costco. The oven takes over 40 minutes to heat up, making food prep a breeze. After investigating the issue, it turned out that I just needed to replace the Ranger Igniter. My old igniter worked and glowed red, but for some reason it wouldn't let my gas valve fully open. I could hear it turn on for a few seconds and then turn off again. again and again. My oven is still under warranty but rather than explaining the problem and trying to get…

My oven has stopped working recently. I checked the resistance of the igniter and it was measured as an open circuit (infinite resistance). I also found that the igniter in my oven is the same for both baking and roasting so I swapped the 2 igniters and then the baking worked but not roasting. I was a bit concerned as I couldn't find a direct replacement for the DG94-01441A (part number for my old Samsung NX60T8511 series igniter), but for $25 I took a chance. This igniter is a plug and play…

Our Samsung oven takes a long time to heat up and I found it just wouldn't light on the first few tries. The actual installation of the part is very simple, a few screws and disconnecting the wiring harness. The stove lit great the first time and I've never had a problem in the 6 months we've had it. that when planning a fuze replacement you'll probably want to allow extra time to actually get to the part. Our oven was only about 5-6 years old, but even then the screw heads of the panel to be…

I bought Samsung for my gas oven because it took more than an hour to heat up to 450 degrees and the burners "pulsed" when the oven heated up. I checked online and found it could be an igniter problem in the oven. This particular item has a plug that is used in a Samsung oven so it was basically plug and play. The hardest part of the installation was getting to where the detonator is. The stove is over 10 years old which means the screws were tightly welded. With a little WD-40 and a little…

Our Samsung gas cooker started to develop problems with poor ignition, spattering and reignition about 2 months ago. After a few google and youtube searches we concluded that this was the stove's main ignition as the pressure in the gas line was good and all the other burners and nozzles lit properly. So we bought this replacement, rolled up our sleeves and got to work. That! Pros: - Fairly easy installation: check out the YouTube video for your particular oven... We had to remove 8 Phillips…