🔌 GZXY 12V CF14 JL-02 3 Pin Adjustable Electronic LED Flasher Relay for Turn Signal Bulbs - 1 Pack Review

Great. I bought an LED relay from another seller and it flashes very slowly at idle and then speeds up as the RPM increases. My guess is that it has to do with the increased voltage as the bike revs up. This thing is adjustable and doesn't change depending on RPM. And it clicks. I like it, probably old school.

I bought one of these when installing aftermarket LEDs and wasn't sure how fast/slow a traditional turn signal would be. This baby exceeded all my expectations! Easy to use and easy to connect, even for a beginner! I have no complaints and would recommend it to anyone looking for adjustable turn signals!

Replaced turn signals on a 2000 Buell, bulb performance was different, flashing fast and not bright enough. I replaced the default flasher with this one and now you can set the flash time from very fast to very slow. Choose the mid-range setting and they're great! It would be possible to install resistors, but it would still be a fixed speed. This adjustable turn signal is great!

When I ordered this indicator the description said it was adjustable - the photo even showed the adjustment knob. Unfortunately, the product I received does not have such an adjustment knob and flashes at a fixed frequency. Otherwise the flasher works great and solved my problem as expected. Even if it were adjustable, I don't know if I actually want my signals to blink differently than they do, so I guess that's fine.

Despite being slightly the wrong size (partially my fault for not checking before buying) works great. You can see how I adjusted it to fix the sizing issue (don't worry I'll pin it to the bottom). Purchased to fix a hyper flash issue caused by the switch to LED turn signals. The adjustable feature is great as I can find the speed I really like. Docked one star because it sounded like a pretty cheap relay, especially compared to the original for my car (2004 Honda Odyssey). Almost like a relay…

. I replaced all the light bulbs in my 2002 Tacoma with LEDs. This relay fits into the Original Equipment relay socket located under the driver's side above the pedals. I pulled the old one out and put this one in. Then I started the car, turned on the turn signal and set the flashing speed to my liking with the button on the relay. You can make the blinking very slow or very fast and everything in between. Find the perfect speed for you and you're done. Danger works the same way. There are no…

Worked very well for custom mounting LED turn signals on a Polaris RzR XP 1000. As expected, that one didn't blink either adjustable blinkers fast . This allows me to control the flash speed from too slow to too fast. I set it to "just right". Note that old thermal turn signals have X, L, and P terminals. Power goes to X, signal circuit to L and pilot light to P. These electronic turn signals have +, - and L terminals. They ground -, connect power to the + terminal and signals to the L…