💪 Upgrade Your Toilet's Flushing Power with Fluidmaster 507AKP7 PerforMAX Universal Repair Kit: 2-Inch Valve, Gasket, and Bolts Included Review

California water accident. We would have worked that out, but my wife kept hearing the toilet in the guest bathroom filling up with water from time to time. I tried a new level valve and baffle thinking they might fail. Do not go. I checked locally to see if I could find a replacement for the shock seat. Do not go. Bought this unit, removed the tank to install it and smeared silicone grease on the threads and around the seals. Miraculously, a few weeks passed, and the tank was not filled…

Installation isn't too hard, it's not brain surgery, but if you're replacing an old flush valve, make sure the old nuts and bolts are rusted and tight and tight enough to reach places . available places, it will take a lot of time. And as mentioned, the kit includes 2 bolts, 4 metal washers and 4 nuts. If you have a 3 hole tank you will need to use an old bolt, 2 old metal washers and 2 old nuts. And in this kit, the bolts turned out to be longer than on my old one, which gave me a couple of…

I worked in construction for many years and changed toilet parts many times. These are usually the insides of most toilets. I ordered 3 to replace the guts of all the toilets in my house. Since then, none worked properly - each had their own problem. In the first toilet, the valve does not close completely, resulting in a small trickle and filling the toilet every few hours. Another toilet, sometimes the float doesn't set the fill level and the tank doesn't fill up after flushing. Remove the…

Fairly easy to install. Simply remove the tank with the two 1/4" nuts/bolts on the bottom, remove the entire old assembly and put that in place. If the old one is glued or glued in place, a sharp but gentle tap. Break that up old plastic out with a hammer. Just be careful not to hit the tank itself or you could crack it. " Filler valve. A word of caution: the rubber washers for the tank caps are made of that highly toxic, stinky Chinese material that makes me nauseous from a mile away. A stamp…

I've had a leaking toilet for the last year and a half which I've ignored until now, the korky fill valve hisses and fills 10 minutes each time. It was a new valve that I bought just over a year ago so I didn't expect it to fail so quickly. I searched on YouTube and found that my toilet actually has a leak problem. So I swapped the fill valve through the Revain and the hissing stopped. But even so, the flow of water from the tank into the bowl continued. I did some more research and found out…