A good drink. After running in, in the fall I prepared 1.5 cubic meters of firewood with it. A good indicator for an engine power of about 3 horsepower. It can also be deservedly praised for a simplified start, economical fuel consumption, as well as a small vibration, which is damped by a special built-in system. I would add the length of the saw bar to it, everything would be perfect in general.

It's been almost four years since I first started using the saw. I frequently forget to remove the gasoline, yet despite that, it still starts up effortlessly every three times after that. Everything was straightforward with regard to the three bolts, as the carburetor automatically calibrated the ATM. The motor operates reliably inside of it. The blade easily slices through any type of wood. The most important thing is to not try to cut costs on the chain. The length of the tire is about…

Bought a couple of years ago this is my first saw. There was a problem with the carburetor setting and gave it to the service. In general, the saw worked well. He worked both with boards and felled trees. In terms of assembly, it does not smell strongly of China. Comfortable in the hands. Gasoline eats a little, on a full gas station it is guaranteed to work for 3 hours.

They took it to the service center, the service center refused warranty repair and warranty inspection, explaining that there was no barcode on the saw and the kuarcode was pulled out in the documents))) we went to and issued a refund. Within two days, a frustrated seller contacted us and found out what was the matter and offered to send us a sticker with a barcode and a torn out kuarkod from the documents. We refused and demanded a refund. Many thanks to for a quick refund.

A convenient saw, I took it as a gift to my father for giving, I regretted that I had not taken it earlier. Powerful, immediately started up, the main thing is to warm it up before work. Well, as usual, read the instructions completely before work, I was too lazy and there were a lot of dances with a tambourine, although everything is described in detail there. Father was pleased with the gift

Didn't go wrong with the saw. I bought it a couple of years ago and it still works like clockwork. I use the saw only for cutting firewood and that's it. In general, in her work, she starts off smoothly and keeps idle. If I work with her on weight, she does not stall. She almost does not give vibrations to lessons. Overall, it's a pleasure to work with her. Worth your money.

In general, I am satisfied, the saw is good. Some saws for this money simply do not start . Its pros: Quickly delivered (to the priests of the world of Hong Kong in 9 days). The simplest assembly. The first start-pumped, started, on the street - 25. Of the adjustments, I only reduced the x. X. Pit well. Nothing is leaking. Cons below: The lower (flat) part of the handle is broken, a very common misfortune, either marriage, or they break it during delivery . A trifle, but unpleasant. Oh, the…

Some pros: Easy assembly. Starts up the first time. Bought for 6400 Cons: A little heavy for me. It seemed that the chain was weakening quickly. I'll check on the third day of work

Bought last year for firewood. I live in the private sector, plus I have a bath, and therefore I prefer to prepare it myself. It's cheaper than buying. With the first launch, I got very tired, but I read that many have it. In fact, you need to pay attention to the candle and everything will work out. + it is necessary to dilute 1:50 a little then there will be no 100% problem. I also sawed hard rocks with it and there are enough turns in the garden, there is a slight vibration, but you quickly…

I sawed firewood for the winter in a week. The saw is good in business, the deadwood falls apart into chocks in an instant. Lightweight, excellent balance, comfortable in the hands. Vibration is almost imperceptible. The chain does not wedge, although I messed around with the adjustment of the auto-lubrication system, at first the oil was leaking. I didn't find any cons as such. The exhaust, however, is chadny - you won’t work in a shed for a long time.

Bought this year for logging and for small jobs. It works out with a bang. It vibrates a little, but in my opinion it is on all saws. It starts with a half turn, unless of course you follow the cold start rules for this. Of course, I had to adjust the carburetor after a month of use, but now there are no problems at all. it is a b / w and the drawings are clear. overall satisfied with the purchase.

I like my chainsaw at work. With good power and a small tire of 40 cm, there is no great load on the engine. I only work with wood. Kruglyak chose a magpie for it, there were no difficulties with cutting. I doubt that the chain and toothed washer will work for a long time. But changing to other spare parts will not cost much, about 500-700, depending on the manufacturer. I'll take care of this in the summer. In general, everything suits me.

Pila fully met my expectations. When I bought I was looking for a normal saw for cutting firewood, and in the end this model came up. The saw does not normally get stuck in the wood. Starts right up with no problems. Maintenance is very simple. I do not regret what I bought. You can keep the weight for a long time. As for vibration, I will not say it seems like there is none during operation.

With my limited budget, I didn’t even look at popular brands. Bought a Huter chainsaw and quite happy with its functionality. With its help, I can cut firewood and do more than one job in construction. I use it from time to time, manual swapping is very handy here. Allows, especially after a standstill, to easily start the saw. I wanted to change the tire on my own for a longer one, but knowledgeable people advised me, they said that it would quickly exhaust its resource and disable the engine.

I bought a saw for small jobs around the house and, in principle, it satisfies my goals. I've been using for several months now. The native chain stretched out pretty quickly so I changed it to a branded one. It is comfortable to hold in your hands. There is almost no vibration during operation, which pleases. If you use high-quality oil and work with pauses, it will last for a long time.

Ordered via internet. Came quickly. The first thing I did so immediately changed the spark plug to NGK. Started up the first time. Adjusted the carburetor for myself. It was strange that the oil for lubricating the chain oozed a little from under the oil adjustment bolt. I sawed a lot of firewood in the country. Here she had to work more seriously, a log of 9 meters and a diameter of 50 cm. After sawing the floor of the log, I noticed that the chain was dry, although there was still half a…

All the negative reviews that I read earlier turned out to be with my saw . At the first start, everything was flooded with oil for the chain (the oil was bought specialized), I turned it down with a screw to failure in the minus, it got better, but it still pours a lot . The clutch did not work, the chain was constantly spinning at idle, removed a little idle, it worked . After sawing 10 logs, the bearing in the tire completely jammed, sawing became possible like a regular hand saw, very…

Got a defective tire. The chain, when scrolling by hand, then stretches, then loosens, moreover, it also clicks when pulled. This is a little scary because of the unknown reason.)) You won’t immediately understand what’s wrong. The sprocket on the tire is not symmetrically riveted, as it were. There were cases and I didn’t understand the exchange within 14 days, that’s all. ((

Disgusting plastic, during the start of the saw, the starter handle jumped out of his hand and hit the air filter cover. The cover is shattered. Sealed with epoxy. I left gasoline in the gas tank for a week, although the instructions recommend draining it, after which I drained an incomprehensible black liquid. In my opinion, gasoline dissolves the plastic in the gas tank. Starter broke the other day. I had to rewind the return spring. Used only a couple of times, but there are many more…

As soon as my wife and I moved to a private house, I immediately bought such a saw. I often use it when harvesting firewood, because we have a bathhouse and a garage heated by a stove. In the summer I redid the porch, it is wooden. Also used a saw. Low consumption of gasoline. The saw is heavy, so I can not work with it for a long time. But no more flaws. And the saw has a great package.