🔧 Efficient Rear Axle Bearing Puller Set - GEARWRENCH 3 Pc. (Model: 41710) Review

Fall apart on third hit backstage. The bokeh of the instrument when first used, five weeks after purchase. Revain only allows returns within 30 days. Mfg's supposed lifetime warranty is a joke. Much luck.

Bought for use on rear axle bearings on a 1995 Grand Cherokee. I used a medium sized puller for the job. Worked great! Robust construction. It looks like it has the required dimensions to service the rest of my vehicles.

I give this product 2 stars because only 2 out of 3 pullers were internally threaded meaning the largest puller was exposed inside and could not be screwed onto it. Sliding Hammer, rendering it useless.

Great product for removing bearings from a car. The only thing I would recommend is to make sure you are seated properly on the bearings or rails. b4 you use a slide hammer. Also keep a spare 22mm wrench handy to retighten the lock nut if it comes loose so you don't damage your system wall if it slips off the bearing.

I had to remove the Alpha One gimbal thrust bearing and sterndrive. Instead of spending $150 on the right tool, I went for this set at 1/4 the price. I used the smallest puller; It took several minutes for the inner rubber boot to free itself. I also had to build a small clamp to fit between the washer and the bushing holding the bearing. I can imagine a few other uses for this product besides rear axle bearings.

Purchased to replace bearings on my 2005 F150 with a 9.75 rear diff. I had to modify the large puller to fit behind the bearing as the axle tube will be narrower. And the second largest puller was too small and only touched the roller bearing, not the raceway. After I took a grinder and a file to smooth everything, everything works fine. Ps also had to use some heat to pull out the bearings. Plus, the tool served its purpose, which is why it only got three stars because it didn't match the…