Genuine Toyota 16100 29415 83 Water Assembly Review

Fits as expected. Krone 2007 There are no new screws. Used old with EP grease. Received a new O-ring in the package. No problem. The generator does not need to be removed, simply unscrew and get started. After installation, run the car for 15 minutes for the timing squeak to go away and everything else to take root. Everything is fine.

Replaced today - removed all bolts from the old pump and installed in the exact locations on the new pump. Unfortunately I found that the new holes for the pump bolts were of different depths and I had to buy shorter bolts (20mm) for the bottom holes and 25mm for one of the top holes - until it leaks - only two extra trips to auto parts store to get the screws of the desired length.

Recently bought this item for my Corolla 06. Called the dealer and he gave a different part number for $168. When I received this new pump I noticed a difference in the vein patterns machined on the inside of the pump near the screw holes (see pictures from another review for reference). I was initially skeptical that coolant would circulate through these gaps, but after removing the original OEM pump, these gaps should not let any coolant through at all. The hole pattern and the flange…