🚗 GooMeng Vacuum Purge & Coolant Refill Kit: An Efficient Solution for Car, SUV, Van, Truck Coolers Review

The kit included an unusual air inlet that was larger and more teardrop shaped than standard air compressor fittings. The rest of the tool looked like it was working properly. Reminder to buyers: you will need to replace the air nipple fitting on the venturi end of the tool.

The first one came with a broken sensor. A replacement was on the way before I sent it back. Before the new one came, I had already bled the cooling system. I don't really need it anymore, but it's cheap and I'm sticking with it. YouTube is your friend, guides are rubbish. I tried it on a water jug and it seems to work. I replaced the air fitting with the correct fitting (I/M industrial connector)

As mentioned I had to change the "compressor side" inlet of the quick coupler. I unscrewed one in place and used the other I had kicked around in my garage for other tools. Be careful as they are in plastic threads. I used pipe tape to ensure a good seal. kept a good vacuum and they poured the right amount of antifreeze into my car. I wish I had known about this years ago. makes cleaning and refilling easier

I bought it to fill my euro cooling systems, but only used it in another function. Used it to pull and maintain a vacuum on a tank I was welding. The tool is of decent quality in terms of value for money. The biggest downside is the non-standard air fittings and the inferior material. Plastic and brass fitting interfaces do not have any thread sealant and have been reported to eventually leak. For someone with basic skill and dexterity, the initial stripping and locker gasket sealing should…

Honestly, it could work. The instructions were half missing and there was nothing online that could show how to use it. I had to go to YouTube many times just to learn how to use it. When I finally sat down to try and use it, it didn't work. I had to hold on to a piece that needs sealing to suck. In the end I made it halfway and finally gave up. I have actually sent it back to Revane and am awaiting my money back. It's really fast. I was very excited to try this but it was very cheaply made and

To call this tool cheap would be an insult to cheap tools. Poor quality plastic parts that leak immediately. Inaccurate pressure gauge, broken valve handle. It took 3 times in total. Spring. .2 1/2 can be. The included instructions were just photocopies of the other instruments' instructions, and even they were so obscured by toner that they were unreadable. Waited 3 weeks for review. My first attempt to contact the seller was immediately met with a "promise" to replace the tool with another…

This kit was missing a large diameter transparent coolant pickup tube with a brass fitting at each end. Another issue is that the main air fitting is not a regular size and you need to replace it with a 1/4 inch nipple so you can connect it to an air compressor. The cone-shaped black rubber stopper is also odd. The diameter is too small to be used in the opening of the Jeep JK 3.6 expansion tank. It is also too long and pointed to seal the radiator opening. the remaining cone to fit and cover…