🏎️ Enhanced HLHONDB-1 Front Disc Brake Conversion Kit for Honda - Elevate Performance Review

This item was so easy to put on and everything snapped into place with no issues. The only thing that really took a while was removing the bolts from the hub and putting new ones in place. I haven't had brakes since I bought a 4 wheeler and now I have them! I love them and would highly recommend them to anyone with old style drum brakes. It's worth your money!

This kit replaces the stock drum brakes on a 2001 Honda Rancher ES 4x4. It was quick and easy to install. All parts and brake pads were included to complete the conversion. The longest part was pushing the new bolts into the hub. I recommend using a press unless you have an old steel vise or you break the vise by squeezing it. I feel like disc brakes work better and require less maintenance so I switched to them.

Nothing but good things to say here. First, there's Wildwood components, a quality name I'm familiar with. The exchange couldn't be easier. Everything fit without any modifications (which you can't always say with "screwed" kits). The only difficulty was pressing/pressing new studs. I would strongly recommend finding someone with abs otherwise you will most likely break your cleats/hub. I'm so glad I don't have to worry about my drum brakes sticking/rusting/etc.

Revain's supplier deserves 5 stars for the help they gave me by putting me in touch with one of the Highlifter managers who provided me with the correct parts to complete the installation. Looks like the highlifter got a bad batch of caliper mounts, and I may have been the first customer to get one. Once I got the right mounts, everything went as described in the instructions. You need to plan to reroute the brake lines from the front of the knuckle to the rear since this is where the new…

This product attaches easily to my 03 Rancher ES. All bores matched to each other, perfect tolerances. This job could probably be done in 2 hours but as I already had to remove the hubs I rebuilt the axle shafts, cleaned and repackaged the bearings, replaced the CV joint boots etc. This took some time but I would recommend doing this to do on an aging quad - you may never have to do it again, and fitting these brakes will get you halfway there. The brakes work wonderfully. At first I was…