- Cleans the air from any odors and microparticles. Pretty quiet and efficient.
- Automatic mode does not always work correctly. The display screen is very bright, there is no way to turn it off. The high cost of filters (they cost as much as 1/4 of the device itself).
- Beautiful design
- It's not clear if there's any point
- Appearance, "smartness", the ability to control through the application. Quality filter.
- Until I noticed. Potentially expensive replacement filters, but they say you can save on alik.
- Control, silent, filter area.
- In general, I don’t understand this particle indicator, it can show 9, then it will work for a while, it seems 1, but I can’t say whether it’s just a display meter or not.
- Stylish design, cleans the air well and quickly.
- Not
- Simple design, affordable consumables, good performance
- Quite noisy, can't sleep normally
- Helps only with large pollution.
- * Cheap * In the maximum mode filters well
- * PM2.5 particle sensor under-reading * Itself will almost never turn on at speed anymore * Noisy
- Operation volume
- The air pollution sensor reacts to the air humidity from the humidifier
- Cleans the air well
- Quiet operation
- Failed to connect to the mi home program via wifi. There is practically nothing in the description on the connection method. After 3 days of work, the dust sensor stopped working, it mainly shows 001. It seems that there is a program for processing the sensor readings. Sometimes the indicator still shows more than 1, it was up to 008. But I know from experience that in the area where I live, the aqi indicator on the street is often very high 70 or more, the content of harmful particles also rises in the apartment. After a week of operation after the device was taken from Player. Ru, the review has changed somewhat. After several dozen attempts, the device managed to pair with the My Home application from Xiaomi, which required 2 phones with wifi and bluetooth internet. There is not even a hint of the connection method in the instructions! The application is also not quite completed, the level of harmful particles that are on the indicator of the device is not displayed. The modes of the device are regulated both from the application and the buttons. After turning off on the phone, which plays the role of a wifi router and the Internet, you need to reset the wifi on the device manually, using the buttons. To reconnect the device, it is not enough just to turn everything on again. The rm2.5 sensor still does not work correctly, shows very low readings, and therefore, in automatic mode, the fan speed does not increase when the rm2 5 level rises.
- The first week it was noticeably easier to breathe in the bedroom. Then apparently quickly got used to a good feeling.
- Price, quality, quickly cleans the air, controlled in the Mi Home application, friends with Alice
- So far not discovered
- It works for a month, it makes noise at maximum speeds like my computer. Certainly not like my vacuum cleaner. Within a month, the filter was covered with a layer of dust about 5 mm thick, if not more. At home, a cloud of dust constantly flew into the light, now it is less, but it still flies. But this is a problem, I think the sofa, it needs to be changed, it’s already old, dust is flying from it. In auto mode, you don’t feel it at all, sometimes you come up to check if it’s alive or not. Spins but very quiet. Large dust in this mode does not filter. In auto mode, it is activated to the maximum if there is minor pollution from the street or you are frying something at home.
- +Plug it in and it works. + Can be controlled from your phone + Triggered by a lit match
- - Does not fight dust - Mopping floors is more effective for dust control - All the time shows that the air is in perfect order,
- Powerful, good quality (except for the item with flaws), at this price there are no analogues in terms of area and quality of filtration.
- The absence of manual speed control, there is no remote control, nor the ability to fully switch speeds on the cleaner. From the purifier, you can only change the speeds "auto", "night", "favorite". Auto mode almost always works in night mode = cleans almost nothing. This is the minimum power for 4 sq. m. It turns out that there is only 1 “favorite” speed, and that one needs to be set through Wi-Fi . If there is no Wi-Fi, then you will have only 1 set speed in your arsenal, which is extremely inconvenient. For example, I bought it for a dacha where there is no router, and I want to turn it on to the maximum upon arrival, and then turn it down to medium. This cannot be done without Wi-Fi, you have to distribute Wi-Fi from your wife's phone in order to switch speeds. Next - a lot of complaints about whistling / crackling when working at low speeds due to cheap Chinese bearings, if you're lucky, read about it on a famous specialized site (about technology) (there are even videos on YouTube). Therefore, if possible, check its operation at these speeds (only through the application) when receiving the goods.