Header banner
Revain logoHome Page
hubcentric eccpp 1 5 6x5 5 6x139 7mm logo

Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm Review

2

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🔧 Tires & Wheels Parts, 🚘 Tires & Wheels

View on AmazonView on ЯM

Media

(4)
img 1 attached to Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm
img 2 attached to Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm
img 3 attached to Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm
img 4 attached to Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm

Description of Hubcentric ECCPP 1 5 6X5 5 6X139 7Mm

🚘【1.5 INCH WHEEL SPACERS HUB CENTRIC SPECIFICATIONS】Please ensure that the installation torque range does not exceed 90 ft/lbs;4PCS Wheel Spacers 6 LUG: 6x5.5" (6x139.7mm) bolt pattern,78.1mm(3.07") Center bore,M14x1.5 thread pitch,1.5"(38mm) thick. 🚘【6x139.7 WHEEL SPACERS Compatibility】Fit for 1999-2018 for Chevrolet Silverado 1500|1995-2018 for Chevrolet Tahoe|2007-2013 for Chevrolet Avalanche|2000-2012 for Chevrolet Suburban 1500|2002-2006 for Chevrolet Avalanche 1500. 🚘【6x5.5 hub centric wheel spacers About the thickness】Please confirm about the Fender Gap,this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap. For example,if your fender gap is 1.5",It is better to choose spacers which is less than 1.5" thick. 🚘【HUB CENTRIC WHEEL SPACERS 6X5.5 TO 6X5.5 Benefits】The spacers 6x5.5 Widen your vehicle wheels base by allowing for a more aggressive stance,eliminate rubbing easily and instantly,greatly improve the vehicle stability!. 🚘【6x139.7mm wheel spacers hub centric 】The body of 6 lug wheel spacers adapters is made of Forged aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength and efficiently eliminate the risk of vibrations

Reviews

Global ratings 2
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Perfect fit and finish

I have a 2WD GMC Sierra with rough terrain and a 3/3 spindle and rear wheel block kit - bought these 1.5" spacers to align the rear wheels. - tightened to 105 ft/lbs - no bolts needed to be cut as the wheels were already recessed and the wheels were tightened to 125 ft. lbs on the spacers. 4 wheels in the near future

Pros
  • One year trial
Cons
  • Slightly torn

Revainrating 5 out of 5

1.5 " on a 2012 Sierra

Worked great. Didn't hit them. Most problems with the spacers are over tightening and tearing no problems. I have them after 500 miles tested and they weren't loose or cracked I've had them for about 1000 miles will continue to check them regularly 8/7/2020: No problems so far, I've put over 15,000 miles on them Just check them when you change the oil and be sure to use a torque wrench, to tighten them.

Pros
  • Good Thing
Cons
  • Negative Gift