💪 Premium Welded Double Hydraulic Cylinder 2X16 - Enhanced Performance Guaranteed Review

Both 15 year old lift cylinders on my loader were leaking badly. Costing about 1/4 the price of a new cylinder from Kubota, this cylinder was an almost direct replacement. The end of the cylinder that the pin goes through is slightly larger than stock and cannot be fitted to a loader. I fixed it with a grinder to make it a little narrower. Performance appears to be identical to the original cylinders.

Worked well as a replacement for the Terramite T5c Boom Cylinder. Had to purchase SAE8 X 1/4" adapters to fit existing hoses. Bottom mount was a little tight, just the petal washer ran a bit on each side. Then it fitted right away. Looks like it would too will fit the arm and bucket cylinders, although the bore is slightly larger than the original bucket cylinder.Need the next size up for the front bucket.(see chart in listing)

I bought a tilt cylinder for my tractor front loader. Installation was easy and straightforward. Just install a pin on each end, add hydraulic lines and you're good to go. The cylinder worked fine for the first start or so. Then a problem arose when the cylinder shaft was bent. Remember that the old cylinder is never bent on the other side. So I called to get a returns number. I just found out that a bent shaft is not covered under warranty. I emailed the head of customer service lady only to…