Hykolity 24W LED Round Flat Panel Light, 2400Lm Edge-Lit Flush Mount Ceiling Lamp For Kitchen, Bedroom, Laundry & Closet Room - 3000K/4000K/5000K CCT Selectable & Dimmable (Black) Review

24W LED is equivalent to 100W incandescent, but this light seems to be even brighter than that. It is not a warm colored light, it does not make things look yellow. I would not use this in bedrooms, living or dining rooms or kitchen. I considered it a good light for workshops.My house is from the 1940's. Multiple tries of connecting the fixture base to the plaster did not work.Removing the existing flat bar that crosses the ceiling box, I was able to connect to the ceiling box with the original

It’s a great light, very bright the only issue was the mounting bracket. You need to get it just right. It’s possible but it just takes time so be ready for a bit of frustration.

I love how bright and low profile this light is! I HATED how much of a pain it was to install.As others have stated, you WILL have to bend the clips. I struggled for half an hour off and on trying to get this thing to "line-up” out of the box. It wasn’t until I read the reviews that I was able to get it on.Once it is up, it is great! Provides plenty of bright white light for my workspace with very little/no heat generation.PROS: Low heat, bright light, great look.CONS: Tough to install, pain to

I installed two of these in a hallway on a 4 way setup (1st gen GE zWave dimmer and two add-on switches).Good:* Light is bright* Even light distribution/diffusion (no hot spots)* Color temp selection (warm/bright/daylight) is nice and let me easily match other lights in the area* Flush mount is pretty flush to ceiling (I didn't need a shim, but can see why one could)* Dimmable 10 - 100% works well, still good even lighting* Trim looked great, which without a mark on it* Sticker on outside of…

First, I really like this ceiling light. It's simple and features a color temperature switch for 3000/4000/5000K. I set it to 3000K because I prefer a warm white in the evenings. If you used it in an office or a workshop, you might prefer the daylight (5000K) setting. I have not tried it with a dimmer. The only issue I have is with installation. The provided mounting screws are M4 (metric) so I had to get some #8-32 x 1-1/4" ones to fit my USA junction boxes (2-3/4" spacing). You have to feed…

I seldom do reviews, but this particular light is well worth promoting.We purchased this to replace a pitifully dim ceiling fan that lived above the dinning room table. The installation was a breeze, as the unit is equipped with a "3rd hand" cable retention device, permitting one person to complete the fitment without issue. All components that make up the lights mounting ring / surface backing plate are of a light gauge steel construction, no plastic, which provides a flush fit at the ceiling…

I used mine differently than usual. I mounted it to my ceiling fan, because the light kit that came with it really socks. I'll post a picture later.

3 of the 4 lights we bought are broken. The rim piece pops off the main light, leaving the light to halo at the top. The 4th light that wasn't broken is missing the the mounting bracket. We can't install it without that. Pretty frustrating.

Switched into 3000K mode, the color is perfect — it's not too warm, not too cold, but just right. The brightness is also very impressive. Dimmed down to half-brightness it's brighter than my previous fixtures. Full-brightness will be great if I ever need to do open heart surgery in my kitchen. Minimalist perfection in a light fixture, and an excellent value. Elmer recommended.

Used in the utility room: really like the color selector, plenty of lumens, easy install (except for old geezer arms working overhead for 15 minutes!), and very low profile. All LED fixtures seem pricy but so much quicker and easier than installing and wiring a can light.

Removed a fan and put this light in its place, the light quality is great and so is the brightness -- dimmable with Lutron dimmers

Absolutely beautiful! Well worth the money! We are replacing every fixture in our home with them! Easy to install, very bright!

After checking the price of circline fluorescent replacement bulbs I decided it was cheaper to replace the fixture with an LED type. I installed this in an roughly 11x8 utility room where I have the washer and dryer, and wanted a lot of light. This fixture delivers. I left the color temperature at the default setting. Although installation is relatively easy, until the wiring attachments are completed and the mounting bracket screwed into place the weight of the fixture rests on the dangling…

I used these in a few apartments I was updating. Worked perfectly and one was on a dimmer. 3 brightness settings are good because you might want to set the hall light to be a little dimmer or brighter, it makes the unit versatile.