IFilters Sediment Comparable Cartridges Included Review

Came on time and definitely improved the taste of coffee, tea and drinking water. A word of caution: Be sure to apply additional Teflon tape or use the strongest tape available on the two 3/4 male threads. I didn't and had to cut the PVC lines and start over. Everything works great now, no leaks and great tasting water. I didn't have room to install the three filter one, but it couldn't have been better. I have a sediment filter, a large whole house filter, and it comes with the house and we…

I bought this filter after reading the review and I'm glad I did. I got a 1/2" 3/4 compression fitting and teflon tape for the steps after deciding where I would mount the case. I measured how much I have. I also need to cut the copper tubing then I did screwed the thread in until it was tight after I applied the teflon tape and yes you use a bit more than most threads too but that's it after I lined up the copper tubing with the fitting and pushed it in until I felt it stopped, did the same on

The filter system works fine, no problems. The bracket is somewhat flexible. Made from about 18 gauge steel, about .050k should be about 6 gauge. 200,000 or so would be nice. I connected everything with 3/4 cpvc. Threaded into two 3/4 stainless steel adapters with about 4 turns of yellow Teflon CPVC gas pipe tape and food grade silicone on the threads. Screwed in about 1/8 of the body. Leave for 24 hours. Install 3 shut-off valves, 2 for the freeze filter and 1 between the pipes for the bypass.