🔌 Enhance Lighting Performance with iJDMTOY (1) 9005 9006 H10 Relay Harness Wire Kit - Ideal for Aftermarket Fog Lights, Driving Lights, Xenon Headlights, LED Work Lamps, and More Review

I used this to add fog lights to my 2000 f250. I cut and shortened most of the wiring harness to my liking which was great as shorter wire runs mean less drag. I also seem to have used LED bulbs which work very well I would add that I didn't use the switch supplied but used my own, overall a great harness as it saves time running your own wires, relays and fuse holders .

I had to buy adapters, I couldn't get a wiring harness with fog light connectors, The wires could be a little longer but it still worked. The adapters I used to allow me to use this harness gave me some extra length needed to access the battery. All I had to do was run a longer cable from the wiring harness at the battery to the switch in the car.

2004 Infinity fx35 Great harness with fuse, switch and relay. I connected 4 lamps to it and connected it to an auxiliary fuse that lights from the key. This model did not have daytime running lights. Only fog lights and parking lights, both of which only came on with the headlights. So I upgraded the headlights to 2500/2600 lumens and now I have amazing high beam headlights.

It works for my application, the only complaint I have is the driver side connector, the connectors popped out every time I tried to put it in my hid light plugging in the lightbulb, so in order not to make a connection I had to wrap part of the wiring harness with electrical tape around the plug to keep it from moving while everything is ok. I hope that if I have problems because of this in the future, it will be replaced free of charge for me without any problems.

I was hoping they would fit without modification but of course they don't. Light guide, only 1 output reached the light from where I put the relay. The other was very short as made for an 18 wheel vehicle (width apart) so I had to cut into the wiring harness at the bottom. I couldn't use the switch for my connection but was hoping I could use the wiring. No, it's too short. urge I had to improvise on mine. The power cords were also too short. This forces you to mount them close to the battery…

Wiring harness works as it should but dimensions do not match image (which does not represent the complete product on its own either). My biggest concern is that the bottom to the battery is only 8 inches long (not even close to the suggested 24 inches in the picture) and the shorter connector to the fog lights is only 6 inches from the main line. Needless to say I had to spend another $10 on extension cords and wasted two days before I could finish. Also, the power switch is a cheap piece of…