InduSKY Upgraded LED Dimmer PWM DC 12V-24V 30A Lighting Dimming Controller Single Channel + 5M 22AWG Extension Cable For Led Strips 3528 5050 Single Color + DC 12V Plugs Female Connector Review

Cute but LED light strip flickers at low levels with this dimmer. I have tried a touch dimmer and no flicker. Wall Switches.

We use this in a camper and have 4 led lights running behind it. So far no issues and provides more granularity than I expected for dimming. It's very smooth, doesn't step up or down like some dimmers when you adjust them.

Dimness was weird. There was actually a very tiny range on the dial that was effective. Outside of that, it was either full-bright or completely off.

I really wanted to be able to control my LED lites at all levels. That's my review! But it flickers badly at the lowest settings

I used this to operate the lights on my HO train layout. I originally had all my lights going directly to my little home made toggle switch box. I cut the wires from my 12 volt DC power supply and the junction box and put this dimmer in the middle so now I can adjust the lighting as desired. Works Great !

The installation is very easy. Simple two wires in and two wires out. Knob is large and easy to operate. Solid construction.The only thing that could be a negative is it’s size. It is large and might be trouble to integrate into your project.

Seems to be working just fine, does what I need it to do. The included wiring is good quality.If I had any complaint, it would be nice if there was a positive detent when turning the switch to the off position (one star deduction). The switch is completely off though in the "off” position.I’m using it to dim 12 volt led strip lighting on an RV.

absolutely a solid dimmer. using this to dim a handful of lights in a canper and i couldnt ba happier with the build quality.

Did not work as soon as I installed it, re-checked connections, was going to use to controll my led landscape lighting, sp disappointing

I actually use this product to control the dew heaters on a telescope I use for Astrophotography. This is much less expensive and the quality is excellent.

I'm impressed with the construction and operation of this dimmer. I attached it to the side of my 3D printer to control a small strip of LED lights. The covered, but easily accessed, terminals look good and function well. The control itself smoothly goes from full bright to all the way off. That's what I wanted and got.

don’t panic when you hear a beeping sound its normal the only way to turn of that sound is to adjust the knob on your desired and your done great product and it built solid.

I'm running a very long series of LED lights that are 12 Volts. I have them wired to a DC adapter rated at 12V 3A. I installed the dimmer between the LED and the DC adapter and the LED lights are on full power no matter how I turn the dial. From all the way up to all the way down, they don't change. They are always on.

I would avoid these without hesitation. I purchased four of them a while back, not from here, but from another source but no matter as they are all originate from China and are resold by various firms. There are also at least two circuits under the cover: the unit with the amber plastic cover over the screws has a different internal circuit than the unit that does not have the cover. At first, I thought the different circuits were an issue as one dimmer was running way hotter than the other…