Header banner
Revain logoHome Page
๐Ÿ’ก inrush current limiters 2ohms ametherm: efficiently handle high current surges logo

๐Ÿ’ก Inrush Current Limiters 2Ohms Ametherm: Efficiently Handle High Current Surges Review

3

ยท

Excellent

Revainrating 5 out of 5ย ย 
Ratingย 
5.0
๐Ÿ‘ทโ€โ™€๏ธ Circuit Protection Products, ๐Ÿ’ก Industrial Electrical

View on AmazonView on ะฏM

Media

(1)
img 1 attached to ๐Ÿ’ก Inrush Current Limiters 2Ohms Ametherm: Efficiently Handle High Current Surges

Description of ๐Ÿ’ก Inrush Current Limiters 2Ohms Ametherm: Efficiently Handle High Current Surges

.

Reviews

Global ratings 3
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Aquarite No Power Problem Solved

This solved the No Power problem with my Aquarite chlorine generator board. The pins were slightly wider than the original part, but I was able to carefully bend one of them in and solder it on. Following other tips I've read about this repair, I cut the old part off leaving a few millimeters of open contact and soldered it to these posts. Unless you have a heavy duty soldering iron it will be impossible to desolder the original part. One thing I didn't do but wish I had cut the pins aboutโ€ฆ

Pros
  • Industrial Electrical
Cons
  • Not as thick as other picks

update from 12/15. My fix lasted a season. Suppose the condition that caused the part to fail the first time still exists. This time I will throw the money into a new board. However, I have no regrets about buying this part and applying the fix. Original Review: Like others, I used this to repair my Aquarite chlorine generator. In fact, the soldering iron takes a lot of energy to remove the old part. The part is soldered into the radiator, which the iron cannot cope with. I ended up using a 100

Pros
  • thermistors
Cons
  • slightly crumpled

This little $8 part has helped me and saved me a lot of money. My Hayward Aqua Rite system stopped producing chlorine with no evidence of a problem. Called Hayward Helpdesk. What a waste of my time. All they did was post links to user guides and general usage FAQs. They also said to contact a local pool repair company to fix my problem. It wouldn't be cheap. I took the salt cell to Leslie to have it checked and it was fine. They tested my water and said the nitrate levels were too high and Iโ€ฆ

Pros
  • Industrial & Scientific
Cons
  • Obsolete