InstallGear Security Keyless 4 Button Remotes Review

Again, if you follow the diagrams that came with the product, you'll never get the lock operators to work! Watch the customer video posted on the Revain website to learn how to properly connect drives. It is also a complete system with all new car numbers. In my case, I missed many features because they were impractical for my needs.

This is a great device for such a low price, I wish it had more programming options but for the price it's pretty good. I would suggest they add Dome Light Supervision as it's been in pretty much every car since 2000 and I've had to delay turning it on up to 45 seconds to get around it. But other than that, it's quite easy to install, if you connect electric locks, watch the video how to do it. Overall a great machine for such a low price.

The system only came with an installation guide that mentions some features, with no information on what these features do or how they work. use them. In addition to the installation instructions, there should also be operating and programming instructions. I found this promising as it cost about the same as the remotes for the existing system in the van I bought and I still had to redo all the connections as they were crimped (and failed) rather than soldered. But with no information on how to

As an alarm it has an internal relay to trigger the door locks. This way you don't have to trigger external relays. I like that it has a real alarm speaker and not just one connected to an alarm. The alarm clock is not too loud. The motion sensor I installed in the middle didn't try to rock the car to test sensitivity. I disabled most features like passive blocking. I'm not sure if this is a setting or not, but if I just park the car in my garage and don't turn the alarm on, the alarm beeps a…

Easy to install. Everyone else seems to have trouble connecting the central locking using the instructions provided, but that hasn't happened to me. I have positive trigger locks. Followed the instructions as written and the locks work great. I wish the siren was louder, but it doesn't matter. To update. I had problems with a dead car battery after a day and a half of inactivity. After doing a parasitic drain test, I found that the alarm was drawing 344mA when turned on. It is too much. As soon

If you're mechanically gifted, have a multimeter and a few tools, you can install this in just a few minutes or a couple of hours, depending on your skill level. I installed this in a '95 Nissan rigid body with 2 relays (not included) to operate the doors. This block doesn't specify it, but it has a window function where it sends 0.6V+ for 30 seconds after the alarm is turned on. This is amazing since you can wire a relay to automatically power up windows. So if you just set the alarm, your car

Very impressed with what it does for the money. On-site keynotes. Locate the lock wire (white/blue wire) and unlock wire (white/green) in the wire harness from the door where it runs under the dash. You can connect them to yellow and brown on the controller and then to common ground. To add a chime to the lock, check out the large fuse box with lots of wiring harnesses under the dash. Use 10mm to remove the screw on the bottom to push it down. Locate connector J and cable 6 orange. Connect…

mmmm Some seats are not fitted on these brands so this is a warning only. I installed it myself and it got me into a world of frustration but I managed to get by with a lot of time and patience. I haven't made any actors yet. I have them just need to find the time to make them. Wiring can be messy, depends on how you do it. Many times I thought I had turned the device off but all I did to fix it was start the car (ON wouldn't start but the accessories didn't) and click unlock and that should…