🔪 Irwin 3046013 Triple Cutter Industrial Tool Review

The best self-eating bat I've ever used. I use it to drill 2x16 joists and it's amazingly fast. As other reviewers have said, don't use this with a drill that doesn't have a clutch. I use it with Dewalt's "hole-hawg" version called the DW124K. This monster has enough mass and grip that I can hold onto while drilling. The only time I got hurt was when I was drilling through a small piece of 2x4 that slipped and hit my leg (to prevent this, first screw the smaller boards onto the larger pieces…

Bit OK but none of the cutting faces properly sharpened. All cut edges were visible and also full of visible small dents, which I corrected immediately. The advantage of these types of permanent blade bits is that if you know how to properly sharpen a chisel or plane, you can at least sharpen most of the cutting surfaces. It looks like the center screw can be replaced or removed with the included Allen key and extra screw, which is very handy. This would have been a 4 or 5 star rating if the…

To help me with a long delayed garage interior finish, I purchased this drill bit so I can drill holes in the 2x4 and 2x6 wall studs and frame the required 2-inches - Install PVC downspouts. for some sink installations. This bit is very well made and works great, but the standard 1/2" electric (wire) bits didn't have enough torque to hold the bit due to the speed at which the aggressively spiraling flutes are on the outside of the self feed Tip pulled the bit into the wood. It was also about as