JACO Elite Low Pressure Tire Gauge for 15 PSI Review

I purchased a JACO Elite gauge for my ATV tires which was to be set at 4_1/2 psi front and 5 psi rear. The standard pressure gauge for my car does not accurately measure this low pressure. The JACO Elite measures in 1/10 psi increments and is very accurate and easy to use. I like the swivel head and the fact that the measurement is held so I can move to a lighted area to check the print. As soon as I see the result, I press the pressure release button and move on to the next tire. This is one…

When I first received this item it didn't hold its breath. You should read the pressure by holding it against the valve. I took the shaft apart and lubricated the parts with some light non-petroleum grease and voila, it works! Now it holds air until I press the trigger. Otherwise the meter seems to be very accurate. I use this on my quad which only has 6psi tire pressure. My standard 0-60 gauges read +/- 4 psi. I really like it for low pressure tires, and the glow-in-the-dark display is a nice…

I am very satisfied with this tire sensor. I'm buying it for an ATV (it's under £5 for its tires!) and this sensor fits. Easy to use, easy to read (and even glows in the dark after a few seconds of exposure to light)! My other two low pressure gauges failed within a few weeks of purchase. After four months of using this gauge (I check the air pressure every time I ride the quad) this gauge still works. I keep it in its original packaging and bubble wrap in a bag that stays on the quad. I have…

Used to check tire pressure after airing. I use 9psi front and 8psi rear for rock crawling. This pressure gauge is perfect because not only does it accurately read your psi, but if it's a little higher, push the exhaust valve and the tire pressure will drop right where you want it. The light sensor works surprisingly well. Even in broad daylight when airing from the shady side of the car. When I removed the gauge from the valve stem, it fell out of the box half a pound per square inch. The…

I bought this sensor a few weeks ago but wanted to use it for a while before posting my review. I bought a JACO Elite tire pressure gauge to more accurately inflate and monitor the very low tire pressures required by our quads and our pickup airbags. Without another calibrated sensor to compare, I can't claim it's accurate, but its readings are very close to other devices and the measurements are very reproducible. The pressure gauge can be conveniently operated with one hand in almost any…

I've been using it for 2 years now and the sensor works great knowing what can happen when it's stored in Dash SxS. To avoid this problem, it is better to keep it in a workshop toolbox drawer. The only issue we had was that the cap over the needle is a plastic lens that was pressed against the gauge needle which reads the PSI of the gauge face. . This is what happened when we kept our Sxs in the dash as we often use them to monitor tire pressure. Something has come into contact with the face of