🚪 Jaronx Inner Door Support Bracket for BMW 3 Series E90/E91, Right Front/Rear Door Handle Inner Door Panel Handle, Passenger Side Door Panel Handle (Fits: BMW 323 325 328 330 335) Review

Great piece, looks great for what you pay (all plastic, no rubber like oem), but aesthetically looks great.Does require removal of door panel and some drilling-old handle mounts are melted plastic onto the rear of the panel, so you have to drill them out to remove them. Other than that, fairly easy to install, and overall, looks great! Although they’re plastic, feel good and more importantly, unless you know the original was rubber coated, you wouldn’t be able to tel they are aftermarket!Would

Better looking than the original one my car had. Watched a few YouTube videos and voila. I did it with no hesitation. Parts are solid and good quality. The color may not be 100 percent matching but that is just being too picky. Wife and kids no longer have to use a napkin or a piece of clothes to prevent all that residue from the original handles getting to their hands. If you are somewhat handy with tools, you would have this done in less than 15 minutes per door. I recommend getting the inner

I replaced the handle for the front passenger door a couple years ago and that went well. I picked the same Jaronx brand to replace both back door handles. I watched two videos on YouTube (again) to remind me of how to do it. You need a plastic trim tool to safely remove the trim. The handle cover piece is hard to snap onto the back part by hand. I got the parts started by hand and then wrapped them in several layers of paper towel and squeezed the parts together with a pair of pliers. They…

It looks good! The install was really easy, took about 20 minutes. You have to pop off door panel but that is easy. You just remove wood trim underneath door handle with plastic pry tool. I didn't have one so I carefully used a small flat head screwdriver. Once removed, there are a few T20 torx screws you remove that hold door panel to the door and then you gently pop door panel off with pry tool or screwdriver like I did. FYI, you will need to disconnect speaker wires, window wires, and door…

My right front passenger handle had gotten sticky and I was in desperate need of a replacement. These guys were less than the dealer replacement and I could get in 2 days with prime. I wish I could tell you it was easy to install because I had my body shop do it but it was fast and looks great. It’s a tiny bit lighter than the factory trim but nothing anyone else would notice. Highly recommend.

This piece fit perfect, color matched original leather beautifully, and it even has a leather texture to the plastic. Doesn’t even look aftermarket. Great buy. Remember, this is only the outside piece. You will need inner piece as well.

Excellent product , took 15 mins . You will need a T20 Torx to get the handle off and 1/4 drill bit to get the connecting pieces drilled off the back of the panel. The screws are a great touch . Buy the 3 recommended products

Fits nicely, but the outer piece is too light in color so it does not accurately match.The inside piece fits great. I think bolt and nuts would work better.

Make sure you realize that this is not the entire handle this is just the back piece. When the reality is the front piece is what you normally need.

Great product.Only wish they would have given instructions on how to install.Be prepared to remove the door panel and do some drilling.

Doesn't feel as solid as the original but worked perfectly as a replacement on my 2008 BMW E93 convertible. May be too bulky or large for some users.

Product fits well. A little bit of effort snapping it together. Overall appears to be well made. The beige color is not 100% match but still looks good.

This appears to fit e92 and e93 but it definitely will not fit those cars, even with very heavy modifications and cutting plastic obstructions. I had to stand down the old handle, repaint the plastic and use new screws and washers to fasten the old stock handle back onto the door.It was a cheap experiment that failed. Not recommended for e92 or e93.

I was actually surprised how good the product is, It fits perfect and it looks better than Original BMW handle Thanks for attention!

First you get what you pay for but not in this case. No hardware to mount. Others for same price include these. Don’t be tricked by the folks answering 5 stars for a gift card. If I could do zero stars I would.

Looks like the original handle. It's made of regular plastic instead of a soft material like the original so it won't melt.

This is all plastic and not the soft mushy stuff on the OEM handle. Pretty easy to install, now we can close the passenger door without having to remove goo from our hands.

This is the second one we've replaced I don't know why BMW hasn't come up with a better design for these door handles because they get so nasty and they chip.In this specific product says it does fit my BMW 320i and when we got it it did not.

Installation was a nightmare for what it is, not the fault of the handle manufacturer of course but.they seem very prone to scratching. Yeah, they're not the weird gooey BMW handle, but not that robust either. Mine is already scratched and it's not a "blends in with the rest of the handle" scratch, it's like there is a thin layer of dye or something for the color and the scratches are much much darker, revealing the actual material.

Actually better than the BMW original handles, I though it was cheap plastic but surprisingly it has some detail and it doesn't melt like the original