🚦 JDMSPEED Universal Street Hot Rod Turn Signal Switch with Flasher – Chrome 12V Replacement for Ford GM Review

Flasher broken on arrival. I had to spend another $17 at the auto shop for a new turn signal. For all the money I spent I could have just bought a better switch.

If you're looking for something to replace your old rack display switch, this POS gives you displays but with no hazard or hazard and no displays. The wiring is crap and the case is rubbish, doesn't hold up in Florida, let alone the outside environment. If you have a toy and want it to look cute, this might work, but just for display purposes.

Three terminal turn signal does not work as described with this turn signal switch. I used a simple two pin turn signal, connected the black wire to L (load), the red wire to +12V and the blue wire I connected to the two front turn signal wires, yellow and green with two diodes. Works perfect

Don't waste your money. It's a very cheap chrome plastic. Ease of installation. However, if you connect the blue wire to the flasher relay according to the diagram, it clicks constantly, and if you disconnect the blue wire, the turn signals will not work. If you already have indicators, then everything is fine, but with this quality, unfortunately, it will not last long.

when i monitor the connections it doesn't work and keeps clicking when i turn off the flasher "pilot, blue wire" is fine but you have no light on the device witch is better because i have dash displays. In any case, there aren't too many options, at least it's cheap and easy to replace. Jeep cj5, not a direct replacement for the original.

The turn signal does not work and the signal unit is incorrectly connected by the manufacturer. the left one was a right turn signal and the right one a left turn signal which didn't match the wiring diagram on the box. I had to swap the wires and put in a new turn signal for them to work. Another piece of junk from China. More than 25% of all parts ordered for golf carts repaired by us are initially defective. Very frustrating. It is difficult to find reliable parts these days.

I returned this item early and ordered another one from someone else as I thought it was defective. This design seems to be popular with this genre, but the item is defective from the manufacturer or connected to China turn signals, as the signal light does not allow the turn signal to be adjusted when connected. The thing works when the signal wire (blue wire) is disconnected. So you can use it without turn signals on the leg. You can hear the blinker and give way. Revine should stop wearing…

This is a simple solution for older vehicles without signals. I had to buy a device without a relay as I had to buy a separate relay for the LED bulbs. I had to connect an indicator light (flashing light on the switch) to my interior light. It doesn't work with a blinker via a relay. Most likely it works fine with incandescent bulbs, I think I caused a problem with LED bulbs. It's a little plasticky and not premium, but reflects the price. Instructions were included and in the box. It's also…