🚙 Enhance Off-Road Performance with JKS 2001 Front Swaybar Quicker Disconnect System for Jeep TJ Review

I have an 03 TJ with 35" tires and a 4" lift. Seems well built and easy to install. I would say follow the instructions that come with it. I don't know how the storage rack rubs against the tire, they seem to pull back to the side when they come loose and I've turned my wheel all the way and it doesn't come close. I see that once they get dirty they are difficult to fix. I would suggest some clean water and some silicone spray. I also want to say that during installation you will be asked to…

They work great! However, since I have a Jeep TJ, there are a few issues. You will need a "puller" to disconnect the old stabilizer links from their place of installation. I was able to "borrow" this tool from my local parts store. But you also need to drill holes in the frame (very specific size) and then use a set of taps and dies to drive the threads into the frame to install the brackets to hang the disconnected links out of the way. I had to buy a crane and a set of dies to get the job…

Installed on Rubicon 2006 Product works as advertised but removing and reinstalling after riding in the mud is a challenge. You have to clean the bushings every time and spray the joint with silicone to make it slide inwards. The detachable uprights that secure the device also interfere if you have a tire larger than 33 inches. The tires rub against the luggage racks, causing minor damage and tearing out the locking pins. I had to buy 6 pieces in 6 months. Installation is not a problem as…

These babes are awesome. We just raised the front of our TJ by 4.5 inches. Due to the weight, about 3 are still seated. They close the gap without pain. Some sort of ball joint puller helps with installation, but otherwise installation can be accomplished with regular hand tools. Instructions are clear and concise. You'll hear conflicting opinions from the guys at Jeep about whether they should run dry or oiled. JKS claims they work with grease and for this reason they come with Zerk fittings…