🚙 Ultimate Performance JKS OGS126 Adjustable Front Track Bar for Jeep TJ, XJ, MJ Review

Very impressed with the quality of this bar. Very muscular compared to the standard. One wonders why JEEP didn't use this design from the start. This didn't completely eliminate my death wobble, so I also replaced the dampers, tie rods, steering stabilizer and wheel alignment. My caster is a little off. Now it is 6° and 6.4°. I highly recommend JKS products.

It fit my 1999 Wrangler perfectly and was just what I needed after I picked it up. It's extremely hard work, especially compared to the stock part, and has endured a lot of abuse without showing any wear. There are cheaper options, but the quality is excellent. I certainly would, but that's again for a different car.

Great product, I installed it in one day. I had to use a blowtorch to heat up an old bolt on the side of the jeep frame and BREAK it completely with a hammer to remove the original cross member. I had to drill a hole in the side of the frame but it's in the directions. I needed a huge drill, but it was taken to a warehouse. Overall happy with the way back. Also, I ordered it around 10am on a Thursday and received it at 9am the next day. Fast delivery! This price was cheaper than on ebay.

This is exactly what an old XJ, ZJ or TJ needs. so that the axle is firmly centered under the frame. Especially when it rides higher than standard ground clearance. I have reinforced springs in the front. One has a 3/4" spacer, the other has a 1 1/2" spacer. I don't do "surcharges". This track has many adjustment options from the standard ride height to about 3 inches higher than would be considered standard. Excellent quality, the connection on the frame is very strong and lubricated. The…

JKS supplies. I already had their quick hitches and had to upgrade to an adjustable anti-roll bar as the PO was doing some questionable things with the lift resulting in steering. Removed OE factory crossbar and aftermarket drop stay. Put it in its place. Worked like a champ to adjust my front axle and no more steering! Others have commented on the hole you need to drill. I bought a set of large metal drill bits from Harbor Freight and the hole was drilled in about 5 seconds. No problems as…