Header banner
Revain logoHome Page
πŸ”₯ kdp 5/8-inch id x 5ft reinforced silicone heater hose & vacuum line, high performance black, max temp 350f, burst pressure 300psi, 4mm thickness, 0.625in/16mm diameter, 1.5m per roll logo

πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll Review

3

Β·

Terrible

Revainrating 1 out of 5Β Β 
RatingΒ 
1.0
🌑️ Engine Cooling & Climate Control, πŸ› οΈ Replacement Parts

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll
img 2 attached to πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll
img 3 attached to πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll
img 4 attached to πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll

Description of πŸ”₯ KDP 5/8-inch ID X 5ft Reinforced Silicone Heater Hose & Vacuum Line, High Performance Black, Max Temp 350F, Burst Pressure 300psi, 4mm Thickness, 0.625in/16mm Diameter, 1.5M per Roll

ID 5/8"(16MM) OD: 0.95"(24MM).160" Wall Thickness - Nearly 3x the thickness of cheap hose. Working Pressure 60 psi, 1-Ply reinforcement construction for higher pressure resistance or higher pressure resistance. Polyster fiber reinforced for high pressure & resistant to coolant additives. Extreme Temperature Resistance with Superior Flexibility ( -65F / +350F ) More on Temp rating below. It applies to general purpose air or water transportation in the engine bay.

Reviews

Global ratings 3
  • 5
    0
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    3

Type of review

Revainrating 1 out of 5

Terrible for Engine Cooling: Avoid!

As a result of using this automotive silicone product, I found that it had actually worsened my engine's cooling system. While it claimed to be reinforced and able to withstand high temperatures, I had the opposite experience. It caused my engine to overheat and ultimately led to a costly repair. The only benefit was a slightly longer lifespan than other cheaper options, but it definitely wasn't worth the negative outcome. Steer clear of this product for your engine's health.

Pros
  • Slightly longer lifespan than cheaper options
Cons
  • Terrible for engine cooling, caused overheating and costly repairs

Revainrating 1 out of 5

Weak Hose: Hoses

Although the hose consists of 4 layers, it is very weak and breaks easily at a small bend radius. In terms of quality, it is in no way inferior to a high-quality heating hose made of silicone. Would advise against buying.

Pros
  • Cheap Price
Cons
  • Set of Factors

Revainrating 1 out of 5

Weak Hose: Replacement Parts

The hose can be 4 ply but is very thin and easily breaks at any small bend radius. Not nearly the same quality as a premium silicone heater hose. do not recommend purchase.

Pros
  • ID 5/8" (16mm) ID: 0.95" (24mm). 160 inch wall thickness - almost three times thicker than a cheap hose.
Cons
  • No mold required