🔑 Keyecu Modified Flip Folding Remote Key Shell for S60 S70 S80 S90 V70 Case FOB 4+1 Button - Enhanced Design and Functionality Review

Be patient, disassemble the old remote control you are tinkering with and everything will work fine. I used a small hacksaw to take apart the top key part of the remote and then took about 20 minutes to free the small glass cylinder. This remote control has the best slot to install the glass cylinder. Works perfectly.

Bought this spare key due to a broken spring mechanism in my current set. The plastic is cheap and I didn't like the placket so I replaced it with the old one. The most difficult step when replacing parts is the transponder chip, as it is glued to the key. But overall a good product for the price. The ring loop is the main reason I chose it over other products.

This item was very similar to the original key; However, my husband is violent and broke the plastic so it doesn't stay connected. When replacing the internals of an old key, pay attention to the springs inside. We also lost the spring so when the key is closed we have to shake the key to release the metal key that goes into the ignition. If we had been more careful and maybe gentler we would have given 5 stars.

The body is so fragile it's likely to break if I drop it, the 'sping action' doesn't even work, I have to press the button and flip it over the Closure. Not to mention that there is a small transponder in the old key fob that also needs to be transmitted. I changed everything and the car wouldn't start. Well my old key fob was completely broken so I had to tape the transponder to the ignition zone so it could start the car. Don't buy if you don't want to waste your money!

Basically I bought this to fix my old key's faulty folding mechanism and add a much needed strong loop hole so I can attach a key ring. your car, you must combine parts of your old key to use it with this new key. You'll need to move the circuit board, battery, small screw, and front and back plates of the top of your old key fob (to keep the Volvo logo and, more importantly, move the small built-in anti-theft resistor). ), and you only need to apply a few drops of glue to hold these top pieces

My original key was cursed like others with a broken and flexible jackknife. The remote's buttons were also quite worn, and the original's key loop was a joke; I'm not sure what they call a key loop in Sweden, but that crap doesn't fly here in America! So in these three points, this replacement key is awesome. The material appears to be identical to the original: very strong plastic with the same matte texture and color, and even the same weight/weight. The keychain loop is amazing: you can put