💡 Effortless Replacing Recessed Lighting: KOR's Ultimate Solution Review

This is a great tool to replace mini lights like the GU10 bulb. I have used this in my house to replace about 70 lightbulbs. Some of them were quite difficult to remove as some were frozen in the mount. With these bulbs you have to be patient and wiggle the bulbs again and again with the tool. It's also helpful to tap the perimeter of the onion with something like the end of a metal butter knife to loosen it if it's not moving with the tool. If you need to do this, tap lightly so as not to…

Better than rubbing with fingertips, but not by much. If the surface of the piston changes, if it is not perfectly flat and smooth, the suction cup is very close to being unusable even if the recessed surface is fully inside the suction cup. And even if the bulb is totally flat, it's only marginally better than your fingertips. You would think they would make better quality suction cups for this very common application, a better suction cup that could be tightened by tightening a screw, or a…

Some of our GU-10 halogen bulbs are available in fixtures with decorative screwed glass domes. Trying to pull the bulb out was a real headache: it was impossible to grab the bulb's edges because the cap got in the way, and when you try to remove the decorative cap by unscrewing it, the bulb prevented you from doing so to take it out. While this suction cup isn't perfect, it makes the job a thousand times easier. In any case, in about 15 to 60 seconds I removed the old halogen bulb or put in a…