🚽 Korky 2021BP TOTO Toilet Repairs: Large 3-Inch Flapper - Easy Installation - Made in USA - Red (Pack of 1) Review

I have 6 TOTO toilets at home. Excellent toilets except for the flap valves. I have purchased the 2023BP universal damper valve but am still not getting good long term results. I called TOTO technical support and read them the numbers of my dampers from all the toilets. The tech explained that while the 2023BP was a generic replacement, the 2021BP was an OEM replacement for my THU253S, THU275S and THU331S shocks. He also sends in spacers for the purge valve levers that the damper valve tabs…

So I replaced my inflation valve with a Korky and also decided to replace the old glue stopper. Well, once the tank was full it immediately ran about an inch or two into the tank and activated the fill valve, which is really annoying. I called Toto and they asked me to check the issue - shut off the water for a few hours and see how low the water has gone. If it were completely dry it would be the filler gasket. If there was still water, it would be a damper. It was a rattle. Even Toto said…

I have a Toto Soiree' 1.6 Gpf Mod #CST 964CF (same as CST 5453) The OE damper is THU138S or THU175S which is compatible with this KORKY 2021. I have used three of these Korykys in the last 4 years with no leaks. But there is one major problem with the Korky 2021BP. There is not enough water in the tank without a full flush. To a to get full flush you have to hold the lever down until all the water comes out of the tank (5+ seconds) My solution was to seal the side opening dampers with tape…

My original Toto damper almost fell apart after 10 years of use. I was worried about what to do because the first thing I didn't know was how to replace the damper. I can hardly drive a nail. Then the light went on - "Check the Internet. Check Revain". I soon found a replacement for my toilet model as well as instructional videos. It was easy to install in just 5 minutes or less. There are no leaks at all. For those in the same predicament as me, try this first. Look under the lid of the toilet

I ordered five of these in late 2015 to replace all the original Toto valves in five toilets in my house and they worked flawlessly right out of the box. Installation was very easy and sealed very well. I even installed new inflation valves (Korky 528MP MaxPerformance inflation valve) and they work great together. Incidentally, last week one of the dampers in my bedroom began to wear out prematurely, sometimes causing the water in the tank to run endlessly to the handle. was rerolled. Fixed an…

Don't waste time. I have had 4 Toto toilets (1 Carlyle, 3 Ultramax) for 10 years now. The valves were an intermittent pain all the time, sometimes they stopped, sometimes they leaked for weeks after being replaced. It depends on the toilet (even the same type). No replacement shock has performed reliably better than any other. I've been wondering why most newly installed hotel toilets have tanks built into the wall - with so many toilets requiring maintenance they certainly can't change…

Check your model. You can't create a generic in TOTO without losing something. The cheap ones don't fit. They have two TOTO products that are suitable depending on the model. This one bounces down when released, the other floats for a full flush. I prefer this as it allows you to flush quickly or hold for a full flush. At this price I would have hoped for a somewhat solid build, but all the classic flaws remain. - metal chain. Why? Can't you get a material that doesn't rust and maybe a little…

Great replacement for repairing the slow leak in our Toto Drake II toilet. This valve fits perfectly and is actually much better than the original that came with the toilet. It's even branded Toto, not Korky, so Toto has to use that manufacturer for that particular part in their toilets. I'm a do-it-yourselfer so installing a toilet is an easy job and replacing the flap is no problem at all. But finding the right one was a problem. The Toto part number for the original damper that was on the…