🚛 Truck Bed Light Strip with On/Off Switch | KUFUNG 3PCS 60'' 405-SMD-LED White LED Strip | Blade Fuse Splitter Extension Cable | for Cargo, Pickup Trucks, SUVs, RVs, Boats Review

They work great and are very bright. Photo was taken at 10pm. The street is dimly lit, the camera's night mode is turned off. The bed is well lit and still holds up well to the railing after a week (truck parked outside). I hope I don't have to order them again, but if only I had to order a new truck!

Connected to the cigarette lighter plug to make it convenient. Red is + and black is -, plug it in and no one is home. I even checked for reverse polarity, there's still no one home. I checked the power directly on the coax connectors for each strip - power is there, the pushbutton switch works fine - no light. lack of quality. Or the lack thereof. I'm glad I only spent about $25.

Worked well. Used in 8ft bed. The cockpit light was perfect and I focused the other two on the sides. Lots of bright light. I have a handrail protector that I cleaned very well and wiped with isopropyl alcohol. I also used a sticky primer and the light didn't go anywhere. Happy with the product and also has the back door from the same company.

There are now many of these LED strings and I bought a couple. So far these are the best! Used them as an extra light in the lid of a truck. Advantages. There are three threads. All are very bright. The glue is excellent. Good insulation and construction. Threads are more flexible than others. minuses. sometime and from there. Happy with this purchase. Already ordered another one!

Lots of cables to make it work. Very bright and does exactly what it's supposed to. The glue on the strip worked better than expected. Hooked up to a permanent hot plug on the 5th wheel, the switch is a little cheap, but it works. Installing another set on a long platform because that install went so well. Update: The Switch has been down for a month with little to no use. The wiring in the switch is sourced from an auto parts store as the headlights are good, but I suggest using a different…

Just finished installing but so far they are working great. My only complaint is that there are a lot of extra cables on the ports. I cut and spliced every joint on these headlights. If I didn't, there would be extra cables everywhere. Also, if you want them to connect directly to the battery, you'll need an extra cable. If you just connect to an existing schema everything should be fine. It comes with a little something extra. In the end, the way I did it (correct and very clean), all the…

I think it was a bit short maybe a few inches or so to cover all the areas for the zipper. In addition, the length of the switch, port and fuze cable had to be changed, and there should be a record to better distribute them or add instructions in case you do not know what to do in such a case when the main flash is shorter and far away from the battery pole. Adding a possible type of wire gauge etc to the instructions. If you are purchasing this product you will definitely need larger gauge…

These lights offer excellent value for money! I agree with some of the other reviewers that the cord length is MUCH longer. The lighting is fine for my 5.5ft bed, but the cord is enough for a 15ft bed. My only complaint is that I wish they had sent more clips to mount the LED strip because as I expected it didn't last more than a day or so even after cleaning the sheet with alcohol or acetone, before it fell down. No big deal, I just went out and bought LED strip clips and fixed it. The wiring…

I got this because it was said it would fit my 3rd gen Tacoma. It's not like this. The whole package is a puzzle. The instructions have a photo of what is in the box and that's it. You have to figure out how it's supposed to work, and that's fine because there's YouTube. I opened the box and found out how to assemble the strips. The stripes were too long from the start. I would have to cut them to fit. Even in the corners where the power cords would connect next to each other, we're too long. I