Lancher 60-Pack M6 x 16mm Screws and Cage Nuts: Ideal Fastening Solution for Server Shelf Cabinets and Rack Mounts Review

I used these in our "communications closet" to power a 16 port PoE switch, a 48 port smart Install switch and 3 24-port touch panels. They work perfectly, the screws are long enough but short enough not to get in the way. This is a good buy.

I came across a network rack that had a small square hole in the front of the rack instead of the usual screw hole. They worked great for equipment I needed to rack mount.

Overall good set of cage nuts and screws for rack mounting. The screws thread in easily, and the Phillips slots are properly shaped and "deep" enough for the power nut - the driver won't slip when screwed in - to unwrap the entire box, no problems threading. -1 star: only downside is the "cage" around the nuts - not as much "spring action" as the others I've used, so they're easier to accidentally pop out of the square post holes than others I've used have. I've used them over the years. Not to

These fencher screws and cage nuts arrived so quickly that I kept to my work schedule at the lab. They will be my partner and without a doubt I highly recommend them.

I came across a network rack with a small square hole instead of the usual screw hole on the front of the rack. They fit perfectly for equipment I had to rack mount.

These Fencher Screws and Cage Nuts arrived so quickly that I was able to keep up with my work in the lab. You will become my partner and I have no doubt I highly recommend you.

This was exactly what I needed. I have 3 Cisco routers which I wanted M6 and not M5 due to their depth. They were a little longer than others I've had which made getting started a lot easier. Especially considering Cisco's "ears" are pretty thick. Total length is about 3/4 inch. Approximately .10 is the screw head and leaves approximately .65 threads. See photo. I also had a little problem with my order that Fencher Co did more and way more than they needed to do. Life isn't perfect. The real…