🔥 10-Pack of 3/32” x 7” TIG Welding Tungsten Electrodes with 2% Lanthanated Review

Already welded 80 cubic meters of gas and a bundle of aluminum and metal wire. I still use the first stick. They don't burn out as quickly as the cheap ones.

The blue paint on the tip is too thick to slip through the collet, so you have to completely unscrew the end of the torch if you want to extend it. You can of course sand it down, but that's an extra step.

With 2% lanth you can weld almost anything. If it's DC then it works, if it's variable then it works. About the blue color for the color code. I do not know. The rod had dimensions of 0.1250. The end of "color" is measured at 0.1260. So,. 0.0010 delta/2 equals . 0005 "Ink Thickness". Because of this thickness, the bar will not go through the collet? My cartridges are not that small in diameter. The dimensions are perfect as far as I can tell. Good product. Ideal arc. Perfect control. Excellent…

Already Welded 80 Cubic Feet of Gas and Bundle of Aluminum and Metal Wire. I still use the first stick, they don't burn out as fast as the cheap ones.

I just left my shop and tried 2% lanthanum TIG electrodes on aluminum and they are excellently processed. I welded on 1/8 Al and it worked super trouble free and held the tip well!