LCDBOARD Controller LP173WD1 N173FGE 1600X900 Backlight with LED and LCD - 8541634849 Review

works for me However, if you run it for more than 5 minutes, the chips on the board get so hot that I might hurt my finger. For those buying this it might be a good idea to put a mini heatsink on top of any chip that seems to be hot. So it will work better and longer.

I had an old laptop with a good screen and I hate throwing things away. This works very well. Attached to the LCD board and now I have a nice monitor to slide under the shelf on my electronic bench. Please note that if you have used speakers with 1/8 audio jack and cannot receive sound via HDMI, you need to enable them in Windows.

Doesn't work with 12VDC, 2A power supply Any input will cause the LCD to light up for a few seconds but not display anything. The only button on the controller that works is "Power". I'll edit the review if it works with a 3A power supply, but I doubt it will work. This is from LP173WD1. I tried the VGA and HDMI inputs, both of them do not output anything, although when connected they are displayed on the monitor.

This product is great, comes with a manual but it only works as expected. Really quick and easy to use. Low-quality stand.!

So far so good, everything you need is there, even a TV tuner, only S-Video and a component are missing. That's my review!

All is well. There are detection issues when an HDMI cable is connected. I've toggled the switch on and off maybe 4 times and swapped the HDMI cables to make sure the HDMI buttons (PS4 in this case) are limited before she recognizes. The other is the backlight, although that's more of a personal preference. The backlight could not be dimmed, only brightness and contrast. Still works and used it for up to 5-9 hours of video games with no issues.

works for me However, if you run it for more than 5 minutes, the chips on the board get so hot that I might hurt my finger. For those buying this it might be a good idea to put a mini heatsink on top of any chip that seems to be hot. It works better and longer that way.

So far so good, everything you need is there, even a TV tuner, only S-Video and a component are missing. That's my review.

I had an old laptop with a good screen and I hate throwing things away. This works very well. Attached to the LCD board and now I have a nice monitor to slide under the shelf on my electronic bench. Please note that if you have used speakers with a 1/8 audio jack and cannot receive audio over HDMI, you will need to enable them in Windows.

Worked as advertised for AU Optronics B140RW02 Bare LCD (1600x900, 14" 40 pins). I used this 12V 3A power supply: SUPERNIGHT DC 12V 3A 36W. SMD LED strips and had no problems getting the board to market.

Extremely easy to use. Plugged it into a monitor making sure the model number was correct, plugged in the power adapter and BOOM, it worked. The power supply I used had enough voltage but not enough amps and still managed to power it for the use I needed. I didn't use anything other than display functions. I didn't use sound/speakers.