📺 Enhance Your TV Setup with the Legrand - Pass & Seymour TV3LVKITWCC2 3-Gang Recessed TV Box featuring Low-Voltage Pull-Thru Brush Strap Review

Must be installed off stud. When cutting drywall, make sure you have enough space to install outlets. If you are too close to the hairpin, you will have to move it. Very important!

Hides cables from your flat screen TV. The central cable passage runs very close to the back wall of the frame. Running the cables through the wall is fine, but trying to pull the cables out of the wall to connect to the TV is frustrating. There is very little shelving space behind the aisle.

Solved all my problems behind my flat screen. Now it can lie completely flat against the wall and the brushes let my long HDMI cable run unnoticed from the cabinets under my bookshelf to my TV above the fireplace. Great built-in socket system at a great price! Easy installation too. Hire an electrician if you are not authorized to run/connect power to outlets.

Installation was easy and the markings on the box make it very easy to line up the box with the front against the wall and place the markings right there , where they should be. . The old work clips hold the drywall securely and the box doesn't move when tightened. One of the main reasons I bought this particular box was the decorative panels that hide the screws. I didn't have it, even though it says so in the product description. That was the only negative for me, but it's enough to annoy me…

First, they don't tell you how deep the wall goes. Answer (excluding what's behind the center hole): 2.5". The product is good, but in typical Legrand style, it's made from some of the worst materials. The plastic is very brittle. If you break it out of any basic need to modify, you need to work slowly and carefully and in general be extremely careful not to break it. They provide two adapters for low voltage front panels and a household socket (100-240V depending on where you live). What if…

Very easy to install with slots at key points around the face frame to mark cutting lines. Simply place your face against the wall, pencil/draw notches near the edges of the perimeter, connect the strokes, and you have the cut lines. No paper templates or other measurements required. These slots are later closed with a latch in the decorative panel. The box is attached to the wall with 4 flaps (similar to the "Altwerk" type boxes). The plastic is thick and appears to be quite durable. My kit…

First you are not told how deep the wall goes. Answer (not counting what's behind the center hole): 2.5". The product is good, but in typical Legrand style, it's made from some of the worst materials. The plastic is very brittle. If you take it out need to modify for some reason, you need to work slowly and carefully, and in general, be extremely careful not to break it. They provide two adapters for low-voltage front panels and a household socket (100-240 V, depending on where you live). What…

Installs in minutes and looks great on the wall. I bought a different product (different brand/style) and found Pass & Seymour much better. I installed mine in a flat wall (2" x 4" interior wall) and it fit perfectly. Another product I purchased does not work in a flat wall and they do not have suitable applications on their list. The center hole can only be used to "run" communication cables into a shallow hole. This worked for me, but may be problematic for others. They provided all the…

I just bought the "3-speed" version. P/N Pass & Seymour - TV3LVKITWCC2 if you want to find it. I wanted 3+ 120v outlets to fit both FireTV and Google or other future dongles. The construction looks solid. This is a more complete set than I thought. The frame requires a 7 3/4 x 6 3/8 wall cutout, well marked with the built in template. This is an old style with 4 metal grommets, one in each corner. The kit includes frames, 1 x LV passthrough (with brushes), 1 x old single block work box…