Enhance Your Ride with Air Lift 1000 Air Suspension Kit 80754: Experience Unparalleled Comfort and Control Review

I installed these on my understated VW MK4 Golf to carry weight/tow a trailer without the tires rubbing, works wonders. If you're an understatement like me, be sure to check with the manufacturer first to see which model suits your nibs.

Works great on my 2011 Mazdaspeed3! Works wonders in helping you crouch under hard acceleration. At first I was concerned about the notches molded into the top and bottom plates, but Airlift says they shouldn't affect their functionality. A few months later they are still holding up and working great. Practical advice for installers; Use a heat gun to heat the string and it will slide over the spikes more easily.

I use these air boxes in the rear coil springs of my front wheel drive car. It might sound a little crazy, but these pads neutralize weight transfer to the rear of the car by keeping the front wheels in place. An added benefit is that the axles stay more parallel to the road, which means much less torque. They aren't bouncy at 35psi (of course it depends on the car) - there's almost no rebound so I ride them aired every day and I love it. With a simple valve stem to bleed and fill, it's a great

I installed this (#80754) on my 2000 Honda Insight. Fits perfectly. No problem. Included donuts are not required for Insight. Simply remove the axle bumper and the small mounting hole/pin that is preventing the axle bumper from rotating. Drill this small hole to 9/16" and thread the airbag hose through this hole. just fit it. Make sure you deburr the hole before installing the bags. I found it easier to remove the lower shock bolt, to allow the axle to move further down, and remove the springs…