💾 Tool-Free M.2 NVME SATA SSD Enclosure Adapter with RTL9210B Chips, USB C 3.1 Gen 2 10Gbps NVME/6Gbps SATA PCIe M-Key(B+M Key), Support UASP Trim for SSD Size 2242/2260/2280 Review

The interface works and the memory fits, but the case gets very hot, the heatsink on the NVME doesn't touch the case, so there it is gives no direct heat transfer to the metal case, which would help. In order for the case to function as a heatsink, a different type of closure is required. I ended up buying a heatsink: https://www.amazon.com/dp/B09C6HCVLT?psc=1&ref=ppx_yo2_dt_b_product_details which obviously doesn't allow the cap to go back on the case and I had to cut out some of the plastic…

I bought this for a specific purpose: I needed to upgrade to a new laptop. I got a deal on a laptop but it didn't have a big enough SSD. So I first used this to move the contents of the SSD that came with the laptop to a larger SSD, and then after some restructuring I used the original SSD to move tens of gigabytes of data from the old laptop to to move the new one. It worked. Installing the SSD in the enclosure took a minute and using it was as easy as plugging it into a USB port. It came with

This works great with my Intel NVMe SSD: it was easy to install and no screws were required. The included cables (USB-C to USB-C and USB-C to USB-A) seem to be of good quality, not flimsy at all. But be careful: the read speed is good, but I canceled the write speed test. in just a few seconds as the temperature rose above what I found acceptable. The case is metal, but there is no thermal contact between the SSD itself and this case. The heat generated under high loads has nowhere to go. I was

if I paid 20 euros for it instead of 39. You'll never hit the theoretical maximum, which is around 625 MB/s, but I'd like to get at least 500 MB/s out. It is well made but does not perform as advertised. "Backing up and storing files over USB is faster than ever, with read and write speeds in excess of 900MB/s/600MB/s when connected to a Thunderbolt 3 or USB 3.1 Gen 2 port. . " . Well it's on USB 3.2 Gen1 and gets 400MB/s when I write this by writing a serial string of zeros in 4K chunks. When…