🖨️ Ultimate Print Head Cleaner and Unblocker Kit - 2 Bottle Kit Review

I have an Eco 3600 reusable printer. I didn't have access to the printheads to use syringes. Instead, I soaked a paper towel in Magic Bullet liquid and placed it under the print head. You can find videos on the Internet that describe how to do this. You will need to leave the paper towel under the printhead for about 4 hours. Then you need to clean the printhead with the printer maintenance function. Then your printer will print like new (better than new in my case).

Awesome, great product. I needed 4 cleanings. Take it when you can't type because your head is full. You will be surprised. The left image is the original, the right is a copy. Great results when I couldn't type at all 1/2 hour ago.

I was comfortable enough taking my Epson R3000 apart to get to the point where I could inject the magic bullet directly into the printhead, which other printers do easier have designed for this kit. I've tried other methods in the past that have videos of it: Blotting paper or paper towel with Magic Bullet under the printhead, soaking overnight. I tried this 3 nights in a row, along with numerous cleaning cycles and test prints, then disassembled the printhead and injected the Magic Bullet into

Delivered quickly as advertised but did not solve my printhead problem. I even soaked the ports twice in a shallow bowl of liquid. Good product but didn't work for me. In addition, the hoses did not match my connections.

I have an Eco 3600 refillable printer. I didn't have access to the printheads to use the syringes. Instead, I soaked a paper towel in Magic Bullet liquid and placed it under the print head. You can find videos on the Internet that describe how to do this. You will need to leave the paper towel under the printhead for about 4 hours. Then you need to clean the printhead with the printer maintenance function. Then your printer will print like new (better than new in my case).

I used a printhead product. The blue didn't print and it was a new cartridge trying to clean the printer so I ordered this cleaning product, now nothing works even though I followed the instructions. A week later I finally had all the colors except blue. Now 10 days later all colors are working and the printer is fine. I would say the product works, you just have to be patient and only do 3 cleanings and then even let it sit for a day if needed, but your printer might not need it as much as…

I was comfortable enough disassembling my Epson R3000 to get to the point where I could inject the Magic Bullet directly into the printhead, eh You can make it easier other printers they have designed this kit for. I've tried other methods in the past that have videos of it: Blotting paper or paper towel with Magic Bullet under the printhead, soaking overnight. I tried this 3 nights in a row, along with numerous cleaning cycles and test prints, then disassembled the printhead and injected the…

This product is great. I found a little trick in using it. Remove the ink cartridges. Place a folded paper towel under the carriage and slide a hollow coffee stir tube over each ink nozzle. Then connect a small injector tube to the top of the stir bar and inject the solution into each stir bar. Use the injector according to the product instructions. Do not use too much force as the hose may slip off. Change the towel as needed. Then fill each nozzle and leave overnight. The next day, repeat the