🚀 Enhance Your Polishing Process with Meguiar's DMC5 DA 5" Microfiber Cutting Discs - 2 Pack Review

Works very well but do not wash in the washing machine. After I washed it in the washing machine, it bent so much that it didn't stick to the polisher. I assume some of it shrunk in the wash. Wash by hand or possibly in a cold machine (guessing only). Besides, they are very good.

The easiest way to remove scratches, swirls and scuffs. .We keep some on hand in case of major failures. Just ordered more for work. 2012 Corvette dog scratched the whole car. Results. Use slower speeds and let the pad and product do their job.

I used one of these with my Torq FX10 DA Buffer and CG Heavy Metal Polish to polish 2 extremely oxidized aluminum fenders. Worked great; However, cleaning with a heavy metal polish is very labour-intensive. If they weren't so expensive I would throw them away. The only thing I found to make them as clean as possible is Dawn. And I was able to get it clean enough to use again with heavy metal polish as the oxidation turns them black.

I love the fact that I can use a cutter on my polish and get results faster! Foam pads have a purpose and I use both. I would not use a microfiber pad for any surface. Foam pads are best for this. If you wet sand new/fresh polish then these pads are for you! Learn the technique of using them as they are slightly different from foam pads. This includes applying compound to the pads as well as the speed of your buffer.

Ideal for touching up complex paintwork. I've used them 5 times and they hold up well. You must take good care of them. After two panels, blow out the panel you are using as it will become clogged with compound and clear coat. I personally will soak it in hot water and Chemical Guys styrofoam cleaner while I use another. Then when I need to change again, I pull out another one and blow air through it until it's dry and clean. Then repeat alternately.

Meguiar's microfiber pads are standard. I use them both at work and from ordinary German cars to exotic and collector cars. I also use them on all my vehicles. Combined with the M100 you can achieve the perfect long range DA finish on many hard layers. Or do you just need a final polish to achieve a glossy finish. Make sure you have multiple polishes for the entire car. This helps keep them cool and keeps the support together. Clean them FREQUENTLY. Their haircut depends on how clean they are.

After a horrible experience with previous microfiber discs I decided to do more research and found I was using them incorrectly. As a result, I wasted my time and destroyed the disk I was using before attempting to fully blend the paint. disc surface. This was crucial and combined with Meguiar's pink makeup I was able to achieve realistic results!

In the past I have only used orange pads after sanding our boat's gelcoat which needed to remove a lot of oxidation. I would use at least half a dozen foam pads, but these microfiber pads can do an entire 18 foot boat, maybe two. Simply use a water hose with a nozzle to clean approximately three 2-foot square sections, place back on the polisher and spin at high speed for 10-15 seconds to remove excess water. I find that slightly damp microfiber pads require almost no re-polishing and…

These microfiber pads from Meguiars are amazing. They seem to spin much better than the foam pads on every DA machine I've paired them with, but they also do a better job than any foam pads I've ever used. You can get so much work done in a very short amount of time with these microfiber pads. These will be the first cutting stands that I would recommend to ANY beginner or even enthusiast as it is very easy to get great results with them. I've found that they tend to break sooner than most of…