Premium Sound System Integration Harness - Metra 70-7553 for Select Nissan Vehicles Review

Easy to connect and wire, may need another connection for low frequency input to work with factory amp, so still looking.

100% Plug and Play with 2008 Nissan Altima with Bose Radio. Works great and allows the factory radio to be upgraded/replaced with a second unit.

Worked for my 09 370z with Bose system. If you're looking to replace your stock device, you'll need this (if your new device has front and rear RCA outputs).

Worked great as a replacement for the Harmon Kardon stereo on 2011 Subaru Outbacks. The new Pioneer 4200 works great with it and connects to standard AM.

This worked fine on my Frontier 2019 with Nav. This allowed me to plug my preamp into the RCA connectors on my new radio for my RF system to pick up. No converter required! Most Frontiers appear to have rewired their head unit wiring for 2019, with the exception of the standard navigation models. Research and pull out an existing radio. If you have a 40 pin connector this won't work for you.

I recently bought a Pioneer 1400 NEX head unit from Revain; I connected the head unit to a regular wiring harness and found that the sound was unrelated to my premium Bose system. I did a little research and came across a Metra 70-7553 wiring harness for a Bose Premium system for my Nissan Altima; Installation is very easy and let me tell you my car stereo has the same premium Bose sound again. This is right for my car. I'm a happy customer.

I used 70-7553 to install a Pioneer MVH-2400NEX in my 2016 370z Nismo (Bose Audio, no sat nav). This worked great for connecting audio and radio. I also installed a steering wheel remote control adapter (Metra ASWC-1) which uses the signals in the same connector. Unfortunately these pins in 70-7553 don't have wires so I had to connect the adapter to the car wiring harness. Automobile. (no counter problem)

DO NOT BUY THIS IF YOU HAVE A 2012 NISSAN ROGUE BASIC WITHOUT A PREMIUM AUDIO SYSTEM. This is only good if you have an external amp or a factory Bose amp. Just grab a plain one with no RCA jacks and plug it into your main unit. Although it is written that it fits, it is only partially true. The wiring harness adapter fits, of course, but the cable does not. How do you know if you have a factory Bose amp? Check the fuse box for the location of the fuse for the Bose amplifier. If there is no…