🔌 Metra 71-7552 Radio Wiring Harness: Compatibility for Nissan 2007-up & Subaru 2008-up Review

Lol. There is a light cable! Most cheap radios don't have it, but the wiring harness has all the wires you need, everything works fine as it should.

Long lasting functional product. Nothing special. But some of the writing on the wires had already worn away by the time they reached me. I had to pull out the owner's manual and look at the wiring harness diagram to figure out which wire is which.

Please refer to the label on this product. 70-7552 (((REVERSE))) This is not the same as 70-7552. Image for item 70-7552 what you need when installing a new radio in Nissan or Subaru. Reverse 70-7552 is used to replace or reinstall the factory MALE end wire harness. The item number mixed up with the photo of the female end makes the addition very misleading. If, like me, you didn't know if your dashboard had a male or female connector and you started soldering, you've just lost your money. Pay…

I bought this wiring harness to avoid cutting the factory wiring in the car. I wanted to add an amp and sub to the factory head unit. This reverse suspension is perfect for this application. However, ALL the backlight cables are missing. It only has one dimmer wire, which is actually wired incorrectly. If you replace the stock stereo wiring with this, you won't have a backlight in the center of the main unit. The CD tray does not light up and the TUne/Seek/Channel/FM/AM Power/Volume buttons are