M5 x 0.8 Micro Bleeder - Motion Pro 11-0095 Silver: Effortless Air Bleeding Solution Review

Clever idea. Better than unscrewing an aluminum screw every time you drive. Make sure you get the right size. Easy installation with a screwdriver.

Easily deflates my 2015fx 250's forks. Must be done after every ride. Use of the FMF card for trail riding. The best bike. Yamaha Blue!

They fit perfectly on my DRZ 400. I like them because they are very simple and effective. I travel quite a bit with my bike in a truck and I firmly believe that removing the air from my forks saved my fork seals.

Great, spend a few dollars more for quality, don't waste your hard-earned money 💰 on crappy Chinese fakes! I see people spending thousands on their suspension just to buy cheap Chinese upgrades, Motion Pro Original and the best!

My bikes got eaten in our truck and trailer several times a week. That's why I often pump forks. That makes it easy. I've heard people say they can get hit in an accident. At least on my bikes this is next to impossible as they are under the handlebars. They are cheap. I have a spare set in case a leak occurs. After many hours of driving and loading and unloading cycles, they still haven't made it.

Read reviews of these leaking oils, not mine. They are quite tricky to install as you need a wider screwdriver than a regular screwdriver as the slots of the head fit backwards. Beware of other two-piece models. If you have to pull it off with pliers, the lower half breaks off at the threads. That was my main reason for buying this type. They are also very small and fit nicely under the steering wheel. If they start losing oil I will update this post.

Fits easily in my 2016 WR250R. The instructions say you have to rotate the fork tube until you can screw in the bleeder, but mine was in a decent spot, which luckily I didn't have to. I just clenched my hands and then some more. I used super lube on the threads and o-ring and everything works fine. Remember to take the weight off the front wheel completely when you bleed the forks. Upload them often! Let's see how my fork seals hold up with this product. I bleed after every ride.

They handled some serious lower suspension blow outs at high speeds with no blow outs as others claimed. So my experience with them on my 2019 YZ450FX is that they are very durable! I'm talking about an accidental nose landing from 20 feet that hit so hard I fell. I'm pretty sure this is the ultimate test BUT I'm using factory oil levels so it's possible that increasing the oil volume could cause higher pressure surges beyond their design specs. Sold out even though they were great for about 6…

First of all, everything is fine. Despite all the confidence of the seller and other sellers from other sites regarding the product suitable for the Honda CRF105R. They do not fit. After several attempts to screw the bleeder in properly, I found that the problem wasn't the depth of the thread or the correct threading for the front fork. The problem is the thickness of the thickest part of the pump itself. For the OEM muffler bolt, a U-shape or half-circle is cut into the top of the fork. The…