🔌 Motive Products - Chrysler/Dodge Adapter 1113 Review

Necessary equipment to pump/wash the brakes for one person. Bought for my 2018 Rubicon JL and works like a champ. Brake system flushed without problems. Recommended for this car!

Worked great on my jeep. You can use it with the Motive system OR it connects directly to the air compressor line for even easier flushing. The brass fitting connects to most air compressor hoses or a quick connect air hose adapter.

First time with this unit. After reading a few reviews of broken caps and leaking issues, I threw in the towel and wrapped the master cylinder around. I increased the pressure to over 20psi and started putting the jeep on stands and then removed the wheels. Less than 15 minutes later I'm ready to go. The pressure doesn't change and I take this picture. (I rotated the master cylinder a bit for the picture.) As long as the gasket is undistorted, it will build up the pressure needed to bleed the…

Fits my Ram pickup. Also works on '99 Dodge. One issue I see is the pads that you get with it. Get two of the same thickness. You are a bit fat. You really have to push and twist the cap to attach it to the brake reservoir. But I assume it will seal well, right? Love the fact that the caps screw on and you don't have to fiddle with chains or anything to close the tank. I should also say that they come with a brass fitting that you screw onto the bleed screw. It's not a quick connection (like an

These Motive vehicle specific brake bleeder adapters are the best. The perfectly processed and anodized metal adapter, which is screwed into the master cylinder, fits perfectly. I was able to bleed all four brakes on our 2004 Jeep Wrangler Unlimited by myself in less than 30 minutes. This, along with bleeding the Motive brakes, makes it fairly easy to service the brake fluid at the 2-year frequency recommended by most manufacturers. All in all a great product and would recommend to any Mopar…