🚗 MotoFab Lifts DR-3F-2R: 3 inch Front & 2 inch Rear Lift Kit for Dodge Ram Pickup Review

Works great, the new rubber is the same height and radius as the normal one, both 33 R20, only the width is different. I've been wearing it for a month now and I feel great. This is a 2017 RAM 1500 Express Quad Cab.

Well done. The process was difficult mainly because I had 78,000 on my truck so I had to deal with frozen bolts. But on Saturday afternoon me and my buddy got everything done. You need an alignment. My front end actually went up almost 4 inches and the rear went up a perfect 2 inches. Rack changed in the process.

I would give six stars if it was an option. I wish I had installed them from day one but I agree that at 100,000 miles from the factory the truck is working as it should. Over time the truck started sagging more in the front, these beauties correct that. The movement is stiffer (a plus for me). I want to do my 2500 now.

The 2019 Rebel comes with a 1" lift kit from the factory. When installing, the front shock absorbers must be rotated 180 degrees. right cup. Now it has been removed. I haven't noticed any problems. Follow the instructions and just put it on. I recommend using 13mm to loosen the brake line retainer and get an extra 2 inches of stretch. This is a good product and they arrived very quickly.

I installed it myself in about 3.5 hours. The truck looks great. The hardest part was getting the strut back onto the forearms. It would have been a bit easier with extra arms, but I was able to do this with a few different sized mounts. With this lift for my truck, the front was only 3/4" lower than the back. After installing it, I decided to update the upper arms. You're pretty much maxed out with this lift, so I suggest taking a look at a selection to throw at cross-country lifts or…

First let me say that the installation was not easy. Any time you change stock suspension, you're going to have problems. You must follow the instructions to do this, there is no other way (shortcut) in installing this kit. The backs were pretty easy, took me about an hour and a half, the fronts sucked. Make sure you have an extra person with you when installing, it will make life easier. I think it was about 3 hours for the front but you could do it a little quicker with this person 2. Take…

Quality materials. I lost the instructions but I read them when I first received the kit. Took me about 4 hours to do all this. Might be faster if I hadn't forgotten a few steps. It was pretty easy. Putting the front end together was a little tricky, but with a long pry bar and an extra pair of hands it went smoothly. I had it on a lift which helped. Before installation I measured 36" front and 38" rear, after installation it was 39" front and 40" rear, this is on a 2016 RAM Big. Horn 1500 4x4.