🔧 MotoFab Lifts 2-inch Front Leveling Lift Kit for Ford F250 F350 Super Duty 4WD (2005-2021): High-quality Made in USA Review

Pretty easy installation, you need to put the car high on the jacks. I have never done spring work and installed them myself in about 1 1/2 - 2 hours. It would be better if you had help aligning the springs when jacking up the axle.

I didn't take any pictures before because I installed it the same night I received it so it was dark. However, you can see that this makes the position of the truck much better. I absolutely love it and would buy it again. It took me about 2 hours to install but I couldn't wait for the morning again.

Very easy driveway project in an hour with minimal tooling. Fits 35x12.5r20 tires on standard rims with no friction issues. Instructions would be nice, but google search does. Don't forget to level up when you're done. I forgot and experienced a pretty severe death wobble at 70mph. The workshop brought it back to perfect performance even without changing the camber.

Easy to install and 2 jacks recommended as some say. The front axle should drop as low as possible, and depending on how high the jack is set, the cross member may hit the jack and prevent the axle from lowering completely. However, installation was easy and alignment is recommended as this will likely result in track misalignment as the axle is now 2" lower than factory.

This kit installed in less than 2 hours; I deviated slightly from the instructions and used a spring compressor kit so I didn't have to remove the spring, shock mounting bolt, or brake line bracket. I braced the truck under the front frame rails with a pair of 6X12 jumpers from my shop. After putting everything back together I got a level on the bed rails and my double was perfectly level. Great product, easy installation.

Great product. Installs the kit in less than 2 hours. The details feel premium. I used an electronic percussion gun, 3 sockets and a 10mm wrench. Instructions included. I highly recommend using 2 floor jacks so you can borrow one from a friend. When you are ready to lower the axle, place a jack under each side of the axle and slowly lower them. Otherwise, it's an easy install. The driving performance remained the same after installation without any problems. I added before and after photos.

I did this on my 2019 f 350 4wd. The landing was perfect. the installation was half as easy, but that's only because i'm not a professional mechanic and don't have jacks and professional tools. Make sure you have enough blocks of wood if you are doing this at home and a powerful impact drill as the screw on the spring shoe is quite tight. Also, if you have 4WD, don't lower the axle too low to break the diff line. it's pretty tight. Great product for the price and what it does. On 09/28/2021, a…