Header banner
Revain logoHome Page
🖥️ mount-it! single monitor arm mount - heavy duty full motion desk stand - height adjustable - fits 19 21 24 27 29 30 inch vesa 75 100 compatible computer screen - c-clamp base - holds up to 33 lbs logo

🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs Review

8

·

Average

Revainrating 3 out of 5  
Rating 
3.1
🖥️ Monitor Accessories, 🖥 Computer Accessories & Peripherals

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs
img 2 attached to 🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs
img 3 attached to 🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs
img 4 attached to 🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs

Description of 🖥️ Mount-It! Single Monitor Arm Mount - Heavy Duty Full Motion Desk Stand - Height Adjustable - Fits 19 21 24 27 29 30 Inch VESA 75 100 Compatible Computer Screen - C-Clamp Base - Holds up to 33 Lbs

SINGLE MONITOR ARM MOUNT: Fits one computer screen sizes 19 20 21 22 23 24 25 26 27 28 29 30 inches, with a maximum support weight of *33* pounds, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure distance, in millimeters, between bolt hole patterns if unsure of size). FEATURES: VESA monitor stand is height adjustable and can be raised from 13" inches up to 18.5" inches. Cold-rolled steel construction is heavy duty and will stand the test of time. Comes with C-clamp base mount for use on desktops 1" - 2" inches thick. FULLY ADJUSTABLE: Monitor arm desk mount can tilt 15 degrees up and down, swivel 360 degrees on three different joints, and raise and/lower 5.5" inches. Key Product Features. EASY INSTALLATION: Monitor swing arm comes with all mounting hardware, tools, and instructions necessary for assembly. US-BASED CUSTOMER SUPPORT: Single monitor stand comes with a 5-YEAR WARRANTY and our friendly and responsive customer support team is available to answer any questions you may have during normal business hours. Key Product Features.

Reviews

Global ratings 8
  • 5
    1
  • 4
    2
  • 3
    2
  • 2
    3
  • 1
    0

Type of review

Revainrating 5 out of 5

Works great on a DIY base

I made a base for my mount out of 2 x 4 material that was ripped to 3 inches wide. See photo. The height of the base is 20 centimeters. That's exactly what you need to work in a comfortable chair. I assembled it with wood glue and drywall screws and covered it with a coat of polyurethane varnish. I used some heavy duty sheet metal screws to attach the bracket to the base. That works great.

Pros
  • Feels good
Cons
  • Embarrassing

Revainrating 2 out of 5

Cannot hold 33lbs

Purchased to hold a 27lb monitor and it is sagging so much I am currently supporting a corner of the monitor to keep it level. The table clamp makes a solid impression. Assembling the stand is easy apart from the screws used to adjust the forward angle. People who find it slipping probably forgot to add lock washers. I would also say that it takes three hands to attach the monitor to the stand as the monitor tends to fall forward until you add at least one of the top retaining screws.

Pros
  • Special offer
Cons
  • Repair

Revainrating 3 out of 5

Doesn't work at all on a table with a smaller edge

The good: The plate is very easy to attach to the monitor and then slide onto the stand. Washers are included, the instructions are fairly straightforward, and little or no assembly is required. The clamp has a tension rod, which is great because it works in tight spaces. The Bad: The clamp itself isn't designed to work on the edge of a table; You need a table edge. The clamp has nothing on top of the table to stabilize the clamp and there is no foam padding to protect your table and minimize…

Pros
  • Good workmanship
Cons
  • No

Revainrating 4 out of 5

Missing micro-rotation adjustment on the head.

Very good mount with one major downside. This is an amazing mount and very, very good value for money. All aspects work well and it is very well made with very good looks. The only major downside is that it can't "rotate". I'm not saying it can't swivel between horizontal and vertical, rather there are no or two minor adjustments to balance the monitor's weight in certain arm configurations versus tilt from the weight of the entire system. Many mounts have this option. This makes the monitor…

Pros
  • Not cheap but decent
Cons
  • Nothing

Revainrating 4 out of 5

Decent basic monitor mount, pretty solid.

This was actually very good for a compact budget device. I put a 29" AOC monitor on it and once I straightened it there was no sagging, bending, wobbling, no wobbling. It feels a bit unbalanced when pulled out, but it's fine with normal use. Rolls smooth and soft. Seems sturdy The mounting clamp (to attach to the table) is a little too wide, I had to attach to the table's standing platform and had to add an extra piece of wood for this, but other than that it's ok. Screw fastening, like a bench

Pros
  • Best in its niche
Cons
  • I'll add later

Revainrating 2 out of 5

Model MI-751 is only slightly superior to him.

The monitor mount for this MI-705 model is simply "good". Rated at 33lbs and monitors up to 30". But the MI-751 model from the same brand, although only rated at 22lbs and monitors up to 27", is actually SIGNIFICANTLY stronger and has slightly more "range". . It has more pivot points, the monitor can be rotated, and the main, vertical, support rod and clamp are significantly larger and stronger, and there are no plastic clips on that main support structure. Weight 10 pounds compared to the…

Pros
  • Large selection
Cons
  • Nothing here

Revainrating 3 out of 5

It's ok but I wish it could be lowered

Thought this stand would fit my Philips 4K BDM4037U display. The original monitor stand that came with the kit was rigid and almost impossible to adjust, and it held the monitor higher than I wanted. I was excited about this stand and thought it would allow me to lower the monitor and have more positioning flexibility with the swing arm. Unfortunately, the VESA mounts on my monitor don't offer much greater drop distance relative to the position of my hand on the Mount It stand. Basically, I…

Pros
  • Free for educational use
Cons
  • Not sure

I took the board to illustrate the problem with this mount. If you're giving yourself unlimited space in fantasy land, this isn't a problem as the base of the mount can be slid to avoid sideways tipping, but it's still annoying after you've crawled across the floor. at the table more than once or twice. The issues could be completely eliminated and make this product a five star if it had a VESA mount design similar to that of the Arctic Z1 Basic that allows for 360 degree rotation. With a…

Pros
  • High marks for support and durability from testers
Cons
  • Not as thick as other options