Mount ONKRON G90 black Review

Strong distortion of one of the nodes. (I'll post it in the photo) Given the weight of the monitor, I can’t attribute it to the minuses. It seems to hold, but it's dark.

There was a lot of fuss with a constantly tilting monitor. Pay attention to how the washers and screws are installed, in what position and in which direction they are deployed. In the instructions, these nuances are not obvious, but they play a very tangible role in the design of the bracket.

Note to those who are in the process of assembly or not at all: the top decorative panel that covers the cables does not snap into spacers, but by shifting down, as if into a groove. Has pros: An extremely handy item. I don't even know how I lived without it before :) Has cons: An inconvenient way to fasten the lower decorative panel, because the cable management is still done already in the assembled state - nothing but a watch screwdriver can be brought there, and the bits of such…

Doesn't keep the monitor tilted. A 32" monitor weighing 6.7 kg, which is much less than the declared parameters. The characteristics do not say anything about working with curved monitors, but one of the pictures on the off site says that the bracket is suitable for such monitors. That is, the product does not meet the specified characteristics.

advise Some pros: performs its tasks, the setting is flexible, enough for most of the countertop (700x2022x30mm), moves very smoothly, does not shake during vibration. Cons below: the rotation of the monitor itself is very tightly adjusted (vertically horizontally), there is a hole as if on a turnkey basis, but there are no suitable ones in the kit.

After using the bracket, I permanently abandoned the original monitor legs. For the bracket makes it possible to freely change the position of the monitor and frees up a lot of space on the table.

With its pros: The design is not bad, strong, all parts of the structure are made of metal, except for one that causes itching and burning in the lower intestines. everything is regulated normally, not perfectly, but normally, a complete set of tools in the box, I didn’t have to climb for something separately. Holds my 32 "monitor with a margin (it weighs 8kg according to doents, those declared 10kg but you can count on it! ). Has cons: The junction of the VESA mount and the holder itself is m

Has pros: spins in all directions, came quickly in good quality. Includes bolts and hex wrench Has some cons: if you often change the position of the monitor, then the mechanism quickly becomes loose, not very confidently holding the monitor at 31.5 ''

Got pros: Holds the monitor well, easy to mount on the table. Successfully holds a 32 inch monitor that weighs 11 kg with the stand. Cons: Rather, not a drawback, but a feature - the position of the monitor does not change freely, to select the position, you need to select the position of the bracket on the table.

I believe that the poor performance of the slope adjustment mechanism is due to the fact that my monitor is curved (samsung odyssey g5 32). On its website and in the instructions, the manufacturer warns that the bracket is not suitable for such monitors. Has pros: Easy and convenient installation. Appearance. Structural rigidity Some cons: I didn’t learn how to fix it on a thin glass tabletop, since the minimum compression of the clamp is too high. Tilt adjustment does not work perfectly…

With a standard assembly, the monitor is 27 d. Falls down (by inclination), we provided for this option and put washers with a grower or whatever they are, after installing them, the screen does not fall, but it is also not adjustable in inclination up and down. It stands in the same position, but it can be tilted by force, but I eat the plastic washers and a groove forms, the result again does not hold the monitor . Somehow I fixed it, but it’s not convenient to use it without tilting.

In general, for such a cost - space. Value for money 10/10. Pleasantly surprised, initially I thought that for such a cost it would not be very good and flimsy, but everything worked out. Incredibly happy with the purchase, I have long wanted to get rid of the default monitor leg (it is incredibly huge) Now I'm going to buy a second one for the second monitor! I remember the company, I will always take only from them. Although, to be honest, there are not so many analogues. This is an…

There is a slight backlash when tilting the monitor (up and down) - at first you tilt it up a little more than necessary, and then it slides down a few degrees. It feels like there is some kind of emphasis there, and it is slightly lower than the position that you set with your hands. This does not cause problems, because. lower than immediately moved out - the monitor does not tilt. There are also some doubts about the reliability of the rotary mechanism that the monitor rotates for a portrait

In general, the bracket is solid. In my copy, there were mining environments (metal dust) on the pins, but that's nothing. I was pleased with the presence of grease on the bushings (who is interested in silicone-based grease, which is somewhat reminiscent of 205yu), I was pleasantly surprised because many people save on it. Separately, I want to say about the organization of wires. If your wires are thick and not obedient, then think about alternative methods of fastening, or replacing the…

Its pros: Sturdy, good quality. Normal cable management. The monitor can be placed in any position. There are no flaws in the design. With its cons: All the same, there is a backlash in one connection. Not critical.

Has pros: A good, strong bracket, hidden installation of the mount - it is simply not visible from the outside - a very interesting solution. With its cons: There were no screws in the kit that were suitable for my monitor in length and diameter .

In general, the goods are excellent, too lazy to return, plus everything seems to be strong. It makes sense to take it if you plan to fix it to the corner of the table, then there are 0 claims. Also, click-to-click delivery was a little annoying. It was said from 12:00 call the courier and you will be at your place in 30 minutes. As a result, the button appeared only after 17:00 and they drove for an hour. While waiting for the button to appear, support said that the goods were anywhere, but…

Unfortunately, there is no way to compare with the best, but this gas lift bracket is designed for 27 ", maybe for 32. But not for 34 (due to weight) it does not fix in positions, no matter how it is twisted.

I'm satisfied The only thing is, if you want to be as close to the wall as possible, then the bracket is not mounted in the center, but to the left or right of the center of the monitor, and if you then pull the maximum towards you, the monitor will not be centered. The monitor moves up and down easily. On my own, it's a little more difficult. 2) I bought a similar thing for my TV (55 inch bracket up to 15-20kg only wall mount) back in 2022, everything worked well, but after 6 years the TV…

I used the native bolts of the monitor, I took the complete washers, otherwise it’s enough just to hang it yourself, but hold the monitor, as soon as you put it on the mount, the gas lift can go down. In general, tighten it so that one finger can be released / lifted, the monitor will not move in any position Pros below: Good fastening, the monitor hangs tightly, it is convenient to lay wires under the casing Got cons: The monitor holder is made of plastic, if you twist it often, it may become…