Netac NV7000 NT01NV7000-1T0-E4X SSD, M.2, 1.0Tb, PCI-E x4, Read: 7200 Mb/s, Write: 6800 Mb/s, 3D NAND, 1400TBW, NVMe Review

Immediately after installing the drive, it was divided into 2 disks, the OS was cloned on one, and the other was left empty for information. CrystalDiskInfo v.7.6.0 didn't see the drive at all. AIDA64 sees the drive itself, but there was no temperature sensor in the description, so it did not display the temperature of the drive. The native utility NetacSSDToolBox, downloaded from the official site, constantly showed the same temperature of 54 degrees, both in load and idle. Because of this, I…

See the pros and cons. Do not forget that for the system to see the disk, you need to initiate it and assign a label to the volume and a name. It is also worth taking if you have pce 4.0 support to get the declared speeds. In order for the CristalDisk program to correctly show the speed test, you need to ate to the latest version and run it on the disk itself (c hdd will be around 6800 mb / s).

At first I could not create a partition, it gave out: the device was not found. Then when it turned out to be created with people copying, it also disappears and is not displayed even in the BIOS

It was used as the main one with w10, it began to freeze with a blue screen, after a reboot it is not displayed in bios. You turn off the PC from 220, let it stand, it appears in bios and loads but not for long and again everything is new, blue screen, etc.

Bought for SONY PS5. I got up without problems, then the software itself formatted everything and you only need to reassign the save location for the games. Bugs and brakes were not noticed, the disk was almost completely filled

I put it on ps5 without any problems, it immediately showed up, the speed was 6.4Mb / s. A little more than 300GB of games moved in 4 minutes.

Before buying, you should pay attention to the pci-e type on the motherboard, because the full speed is only available for the 4th generation. 3 will be 2 times lower

In general, I am very satisfied and, judging by the tests (see photo), this Chinese has surpassed WD_Black, although it is connected via PCI_E 3.0 x4 The first photo is Net, the second with the settings and the third VD

On MSI Z490 MAG TOMAHAWK + i5 10600K, did not work. Changed between slots M.2_1, M2_2 and through an adapter to the PCIe slot. It is not visible either in the BIOS or in Windows (W10 Pro 64). In the list of devices it is defined as NM-5236, in disk management a 2GB disk is visible that is not initialized. Doesn't respond to any commands. When the system starts, it hangs on a black screen for a long time, with this device connected. In general, I gave up after a couple of evenings :(

Installed on PlayStation 5. Works perfect. Now you don’t need to worry about what to delete in order to install a new game, or download the next ate.

does not issue a refund referring to writing to the seller, the seller is silent. Do not buy in the market if you do not want a bunch of hemorrhoids.